Care And Maintenance; Cleaning And Maintenance; Replacing The Filters - Zonair3D AIR+50 Manual De Usuario

Care and Maintenance

To keep the unit in optimal condition, read the following indications:

CLEANING AND MAINTENANCE

·
Disconnect the unit from the mains before cleaning it or carrying out any
maintenance.
·
To clean the outside of the Air+ 50, use a cloth dampened with water, and if
necessary, neutral detergent.
·
Do not pour liquids into the unit's air outlet (upper opening).
·
Do not use solvents or corrosive materials, as they may damage the surface.
·
The Air+ 50 works with a fan that is maintenance-free.
·
Do not try to repair or adjust any of the unit's mechanical parts.

REPLACING THE FILTERS

The Air+ 50 is supplied with the 3 filters installed.
They are easy to replace.
For optimal operation of the unit in normal conditions, Zonair3D
following program of filter changes:
22 Air+ 50
FILTER
Prefilter (G4)
GRSystem | Zonair3D
TM
Absolute filter (Hepa H14)
recommends the
TM
TO BE REPLACED
Every year
Every 4 years
Every 4 years