Miele Electro Premium SEB 236 Instrucciones De Manejo página 12

en
Adjusting the height
See illustration f
The Electrobrush has five settings for
adjusting the distance between the
Electrobrush and the floor. The display
shows the setting selected.
Setting 1 - closest to the floor
Setting 5 - furthest away from the floor
^ Press the foot switch repeatedly until
the required setting is reached.
Releasing the connection
socket and switching on the
Electrobrush
See illustration g
^ Press the release button to release
the connection socket.
The Electrobrush will switch on. To
switch the Electrobrush off during
vacuuming, raise the suction tube to
the vertical position. The connection
socket will then click in position.
On / Off switch on the handle
The electro suction hose (SES) has a
switch on the handle which can be
used to switch the Electrobrush on and
off separately. This means you can
switch the Electrobrush off during
vacuuming and the vacuum cleaner will
continue to operate using suction only.
This is useful when moving from
vacuuming a fitted carpet to a rug, for
example.
12
Multi-function indicator lamp
The indicator lamp on the Electrobrush
glows yellow when the Electrobrush is
switched on.
If the Electrobrush switches itself off,
either a blockage has occurred
(indicator lamp glows red) or the
overheating protection has been
activated (indicator lamp will remain
yellow). See "Problem solving".
Disconnecting the Electrobrush
See illustration h
^ Press the release button and pull the
suction tube out of the Electrobrush.
If you have an SEB 234 L you will
also need to disconnect the plugs.