Controls And Settings; Direct Controls - Urmet DS1092-060B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2

CONTROLS AND SETTINGS

8
6
7
3
5
5
4
1
2
2.1

DIRECT CONTROLS

POWER CONNECTOR (DC) [6]
Plug the power wire of the adapter provided into the respective DC.
ON/OFF BUTTON
[1]
This is used to switch the monitor on and off. The green LED (2) lights up when the monitor is on.
IMPORTANT NOTE
If the following message appears on the monitor after pressing the button (1):
NO SIGNAL
and the led (2) becomes red, it means that video signal is missing.
AUTOMATIC ADJUSTMENT BUTTON (AUTO) [3]
Available in "PC" mode only.
ADJUSTMENT BUTTONS (- or +) [5]
These are used to select the various input signals and to select control functions.
In "AV" mode, they directly control speaker volume.
Press "-" or "+" to decrease or increase the value of the parameter.
OSD MENU BUTTON [4]
This is used to access and quit the OSD (On-Screen Display) menu.
PC SIGNAL INPUT (VGA) [7]
PC input.
PC AUDIO INPUT (PC AUDIO) [8]
Jack socket audio input.
DS1092-060B
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1092

Tabla de contenido