Klarstein Alpbach Manual Del Usuario página 27

• The heating symbol is displayed as soon as the room temperature falls below the
factory-set temperature (10 °C) and the appliance starts to heat up. Otherwise, the
symbol is not displayed.
• The clock symbol flashes on the screen because the time has not yet been set.
Follow the steps in the „Setting the Time" section to set the time.
• When the power is turned on, the unit beeps twice as the volume increases.
• When the power is turned on, the heating status, the set temperature and the clock
icon are displayed.
• If no setting is made within 60 seconds of turning on the power, the screen will go
blank. Press any button to display the screen again.
• When the power is turned off, the unit beeps three times as the volume decreases.
Key Lock
• Press and hold the OK button (C) for about 6 seconds to activate the key lock. The
„LOC" indicator appears on the screen.
• „LOC" flashes on the screen for about 6 seconds and then disappears. When a
button is pressed, „LOC" flashes again.
• Press and hold the OK button (C) again for about 6 seconds to deactivate the
button lock.
Note: The ON/OFF button (B) is never locked.
EN
27