Problem Solving - Home Touch PerfectSteam Professional PS-350 Manual De Instrucciones Y Garantía

Problem Solving

PROBLEM CAUSE
ON/OFF switch does not Steamer not plugged in
illuminate when pushed
Circuit overload
Steamer fails to heat Steamer not plugged in
Foot press ON/OFF
switch not in "ON"
position
No Steam Steamer not plugged-in
Steam on Demand button
not in "ON" position
Water tank is low or empty
12
SOLUTION
Plug into electrical outlet
Check household fuse
box and reset the circuit
breaker or replace the
fuse. Do not operate
another high wattage
appliance on the same
circuit
Plug into electrical outlet
Press the toe touch
ON/OFF switch on the
steamer body
Plug into electrical outlet
Press the Steam on
Demand button located
on the steamer handle. It
will glow green.
Check water tank to be
sure it is full. See filling the
water tank on page 7.
PROBLEM CAUSE
Steamer beeps Water tank is empty
Steamer has reached
heating temperature
Water filter not installed
Steamer nozzle spits Steam intensity too high
water
The steam nozzle and
hose are not being used
in a vertical position
1 3
SOLUTION
Re-fill the water tank
Push the Steam on
Demand button to begin
your steaming session
Install water filter per
Assembly Instruction #7
on page 6
Reduce steam intensity to
a lower setting
Hold the steam nozzle
and hose vertically