EAS ELECTRIC EMR84Z Manual Del Usuario página 25

4. MAINTENANCE AND CARE OF REFRIGERATOR
4.1 Cleaning
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling
effect and energy saving.
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a 3
soft cloth dampened with soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odor.
Please turn off the power before cleaning interior, remove all foods, drinks, shelves, drawers, etc.
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking
soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the
door and let it dry naturally before turning on the power.
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners),
it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary,
combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterial
accumulation in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the
interior of the refrigerator or contaminated food.
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or
diluted detergent. Dry with a soft cloth or dry naturally.
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent,
etc., and then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which
may damage the fridge surface and interior. Boiling water and organic solvents such as benzene
may deform or damage plastic parts.
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect
electrical insulation after immersion.
V.2