Lovibond Tintometer MD 100 Manual De Instrucciones página 8

Close vial(s).
Remove the vial from the
thermoreactor. (Note: vial
will be hot!)
25 ºC
15 ºC
Allow the vial to cool to
room temperature and then
measure.
EN Method Reference Book 1.0
Carefully invert several
times to mix the contents.
Note: Will get hot!
60 °C
Allow vial(s) to cool to 60
°C.
Place blank in the sample
chamber. • Pay attention to
the positioning.
COD LR TT / M130
Seal the vials in the pre-
heated thermoreactor for
120 minutes at 150 °C .
Invert several times to mix
the contents.
Zero
Press the ZERO button.
EN
9