Grille Operation Procedure; Detailed Settings - Toshiba RBC-AMS41E Manual Del Propietário

01-01RBC-AMS41E_EN.fm Page 9 Friday, April 18, 2008 9:53 AM

Grille operation procedure

The functions will differ depending on the model and
system.
* For further details, refer to the operating instructions
of the air conditioner.
Operation
1
Hold down the grille button
4 seconds.
• The display transfers to the grille up/down screen,
and the indoor units stop operating.
• The filter , grille up/down
blink.
* The "no function" display
grille is not connected or the control settings have
not been established correctly.
2
Push the button (37), and select the indoor
unit for which the grille is to be set.
• Each time the button is pushed, the unit number on
the numeric display changes.
* The fan of the selected indoor unit starts running,
and the louver swings.
3
Push the TEMP
up/down grille.
• When the button (49) is pushed, the up/down
grille goes down slowly; conversely, when the
button (49) is pushed, the up/down grille goes up.
• If the up/down grille makes contact with an obstacle
while it is going down, it stops.
• Several seconds after the up/down grille rises and
is neatly stowed in the air intake, the motor stops.
* The louver swings while the grille is going up or
down.
* When the grille is stowed in the panel, this
stowing operation is repeated 3 times to ensure
that the grille is safely stowed away.
4
Push the
grille.
• The up or down movement of the up/down grille
now stops.
• If the button (32) is not pushed and the
grille continues to move down, the grille will
automatically stop when it has moved down to the
distance set.
* To change the movement from up to down or vice
versa, stop the up/down grille movement first,
and then make the change.
5
Push the grille button
• The grille operation mode is exited.
• The filter , grille up/down
goes off, and
* While
to the keys of the remote controller even when
they are pushed.
(47) for at least
and numeric display
appears when the
or button (49) to move the
button (32) to stop the up/down
(47).
and numeric display
blinks.
is blinking, there is no response
Correct operating procedures

Detailed settings

The functions will differ depending on the model and
system.
• For descriptions of the following settings, refer to the
operating instructions of the air conditioner.
– Changing the swing type
– Fixing or releasing the louvers
– Changing the save operation settings
EN
9