Compliance With Standards - Philips AT9 Serie Manual De Instrucciones

Ocultar thumbs Ver también para AT9 Serie:
Tabla de contenido

Publicidad

-
Use, charge and store the appliance at a temperature between
10°C and 35°C.
-
Always place and use the shaver on a surface that is fluid-resistant.
-
Only use the adapter and accessories supplied.
-
Always put the protection cap on the shaver to protect the shaving
heads when you are travelling.
-
If the shaver is subjected to a major change in temperature, pressure
or humidity, let it acclimatise for 30 minutes before you use it.

compliance with standards

-
This shaver complies with the internationally approved safety
regulations and can be safely used in the bath or shower and cleaned
under the tap (Fig. 2).
-
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliances are safe to use based
on scientific evidence available today.
general
-
The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
-
The adapter transforms 100-240 volts to a safe low voltage of less
than 24 volts.
-
Maximum noise level: Lc = 69dB(A)
Environment
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 3).
-
The built-in rechargeable battery contains substances that may
pollute the environment. Always remove the battery before you
discard and hand in the appliance at an official collection point.
Dispose of the battery at an official collection point for batteries.
If you have trouble removing the battery, you can also take the
appliance to a Philips service centre. The staff of this centre will
remove the battery for you and will dispose of it in an
environmentally safe way (Fig. 4).
EnglISh
5

Publicidad

Tabla de contenido
loading

Tabla de contenido