Removing The Rechargeable Battery; Guarantee And Support - Philips sonicare AirFloss Ultra HX8432/03 Manual De Instrucciones

ENGLISH
14

Removing the rechargeable battery

Please note that this process is not reversible.
1 To deplete the battery, repeatedly press the activation button until
the AirFloss Ultra no longer produces any bursts of air (Fig. 22).
2 Remove the nozzle from the handle. (Fig. 23)
3 Firmly grab the handle with one hand at the top and one hand on
the bottom (Fig. 24).
4 Snap the handle into two parts. (Fig. 25)
Note: This step requires a good amount of physical force. The top and bottom
half of the handle should be separated once you snap the handle.
5 Remove the bottom half of the handle (Fig. 26).
6 Cut all 6 wires on the internal component with scissors (Fig. 27).
7 Completely pull apart the internal component from the top part of
the handle (Fig. 28).
8 The battery is located inside the top half of the handle. Remove the
battery and dispose of it properly (not in household waste) (Fig. 29).

Guarantee and support

support
Guarantee restrictions
The terms of the international guarantee do not cover the following:
- AirFloss Ultra nozzle.
-
repair.
-
discolouration or fading.
35_020_9638_1_DFU-Booklet_Simple_A6_v2.indd 14
www.philips.com/
12/12/14 11:47 AM