imtech iMatJet Instrucciones De Uso página 5

Transport
Remove the batteries before transporting
your iMatJet®.
By car or train
Transport your iMatJet® in the trolley included in the scope
of delivery. Before transport, remove the batteries for the
❻
power unit and secure the contacts with protective caps
❺. Place the batteries in the trolley together with the
iMatJet® . Stow the trolley safely in your vehicle / on the
train.
By plane
Package the iMatJet® carefully in the trolley to
avoid damage in transit.
During transport by plane, the batteries of the
power unit must be transported as dangerous
goods.
For this purpose, they must be specially labeled. Ask your
airline about this and also about regulations for the transport
of sports equipment.
Shipping the batteries
Never ship the batteries
yourself, as these fall
into the category of
dangerous goods.
As the batteries can heat up or catch fire under certain
conditions, only ship the batteries through your
specialist dealer. If you have any questions, please
contact our service.
Charging the batteries
Please note that the batteries may lose power more
quickly depending on their age and duration of use.
Take this into account when planning your trips and
replace the batteries with new ones if necessary.
You can obtain information about replacement and
replacement batteries from your dealer or our service.
Only connect the supplied charger
batteries.
Before operation:
Plug the charger into a socket. If the signal light is
❷
green, the battery is fully charged and ready for use.
If the signal light glows red, the battery is not fully
charged yet.
Disposal and recycling
As a consumer, you are legally obliged to
properly dispose of old electrical appliances.
The same applies to batteries. Regional
recycling centers serve as the first point of
contact.
The electrical components of the iMatJet® must not
be disposed of with residual waste.
Inserting the batteries into the power unit
Be sure to check the
batteries into the
the ❺ protective caps from the
batteries.
Push the batteries into the power unit in the correct
position. Ensure that the batteries are firmly inserted.
Secure the respective batteries with the 4
❷ to the
clips.
While driving:
You can see the
for the iMatJet® power unit on the remote control;
five red bars means: fully charged. The fewer bars are
visible, the more power has already been used.
The batteries of the iMatJet® must be treated as
dangerous goods and are therefore subject to special
labeling requirements.
The batteries must be disposed of by the seller or
manufacturer. Feel free to contact us by email at
service@imatjet.com with your requests.
seals before pushing the
❸
❼ slot of the power unit. Remove
❻ contacts of the
locking
❹
❽
charging status of the batteries
5