Saivod TMS307 Instrucciones De Montaje página 35

TROUBLE CAUSES & THREATING METHODS
TROUBLE
CIRCUMSTANCES
THE FAILURE OF
INDICATOR LIGHTING
LOW WATER-EXITING
TEMPERATURE
NO WATER COMING OUT AT
THE HOT WATER MOUTH
WATER LEAKAGE
PACKING LIST
NO.
1
2
3
4
5
6
7
water heater.indd 35
OBSTACLE CAUSES
1.THE POWER-SOURCE PLUG NO POWER OR
BAD CONTACTS
2. THE INTERIOR WIRE MATERIALS
DAMAGED
3. INDICATOR DAMAGED
4. THE OVERHEATING PROTECTOR MAKING
FUNCTIONS
1.DIFFICIENT HEATING TIME.
2.THE MIXED WATER VALVE'S TEMPERATURE
ADJUSTMENT IS OVER LOW.
3.TEMPERATURE-CONTROLLER MAL-
FUNCTIONAL
4.THE HEATING TUBE DAMAGED
1.HALTING THE TAP WATER
2.TOO LOW TAP WATER PRESSURE
3.THE TEMPERATURE-CONTROLLER IS IN
MAL-FUNCTIONS.
4. THE MIXED WATER VALVE BROKEN
5.THE PIPE'S CONNECTIONS ARE
CONNECTED IMPROPERLY
1.THE VARIOUS PIPE MOUTH'S CONNECTION
POSITIONS ARE NOT HERMETICALLY SEALED
2.THE TANK LEAKS THE WATER
NAME
ELECTRIC WATER HEATER
OPERATION HANDBOOK
INFLATION BOLT
SECURITY VALVE
SEALED RING
FILTRATED GASKET
RELIEF TUBE
DEALING METHODS
INSPECT WHETHER
IT EXIST THE POWER
AND THE TOUCHES
BETWEEN THE SOCKET
AND PLUG MUST BE
GOOD.
INVITE THE
PROFESSIONAL TO
REPAIR IT
AWAIT THE HEATING
TIME.
ADJUST THE MIXED
WATER EXITING
TEMPERATURE TO BE
HIGH
INVITE THE
PROFESSIONAL
TO MEND IT BY
INSPECTIONS.
AWAITING THE TAP
WATER TO PROVIDE
THE WATER
WHEN AWAITING THE
WATER PRESSURE TO
RAISE HIGH, RE-USE IT
CHANGING IT
CORRECTLY CONNECT
IT ACCORDING TO
THE DIAGRAM'S
REQUIREMENT
HERMETICALLY SEAL
THE CONNECTION
MOUTH WELL
INVITE THE
PROFESSIONAL TO
CHECK AND MEND IT
UNIT(PIECE)
1
1
2
1
4
1
1
3/1/2017 4:42:44 PM
GB
35