Warranty Information
This manual provides the installation, safety and operating instructions for the electric crepiere.
We recommend all installation, operating and safety instructions appearing in this manual to be
read before installation or operation.
Electric crepiere is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug electric crepiere into a properly grounded electrical outlet of the correct voltage, size,
and plug configuration. If the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials. If safe distances are not maintained, discoloration or
combustion could occur. Do not locate electric crepiere under shelving or closer than
12" (31 cm) from the ceiling.
4.- Allow a minimum of 12" (30 cm) clearance along the sides. Allow a clearance of 20" (50 cm)
along the front and rear discharge to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power cord.
6.- To prevent any injury, discontinue use if power cord is frayed or worn.
SPECIFICATION
MODEL:
VOLTAGE:
CYCLE:
POWER:
GRILL SIZE:
SIZE:
NET WEIGHT:
WORTHY INFORMATION
Keep these instructions for future reference.
WARNING
69122
200-240V
50-60Hz
1000W
Ø30 Cm.
40x36x11 Cm.
2,120 Kgr.
19