Functions; Quickview - Cuisinart CPT-520 Manual De Instrucciones

FUNCTIONS

The BREAD TYPE function is designed to toast, or defrost (in conjunction
with the DEFROST setting) various types of bread based on their unique
properties. Some breads require more or less time due to density, sugar
content, and other factors.
The WHITE BREAD function is designed for soft, white sandwich
breads. These breads are made mostly of refined white flour and are
more commonly known as the sliced, packaged varieties found in the
supermarket bread aisle, labeled as country or farmhouse white.
The BAGEL function is designed to toast bagels to perfection by
reducing heat on one side of the toasting slot. This toasts the cut side
of the bagel slightly more than the other side.
A directional icon located on the top of the toaster shows you
the correct way to insert your bagel. (The cut side should always
face away from center of the pair of toasting slots.)
The WHOLE WHEAT function is designed for unrefined, nutrient-dense
breads made from 100% whole grains, or mostly whole grains, including
varieties such as whole wheat, sprouted whole grains, rye, oat, flax, etc.
The ENGLISH MUFFIN function adds extra time to the toasting cycle to
allow for a more dense bread type.
The WAFFLE function is designed for waffles. Select DEFROST for
frozen waffles.
The PASTRY function is designed for toaster pastries. Exercise caution;
the filling can become quite hot, long before the surface of the pastry
becomes browned. Start by using the lightest setting. Never leave toaster
pastries unattended while toasting.
Defrost
The DEFROST function is a longer cycle designed to first defrost and
then toast the bread to the desired browning shade. LED indicator will
illuminate when selected.
Single Slice
The SINGLE function evenly toasts one slice of bread, side to side.
LED indicator will illuminate when selected.

QuickView™

The QUICKVIEW™ feature allows you to check on the toasting progress
without interrupting the cycle. Simply press the button during toasting
to momentarily lift the bread to observe the shade status. The bread will
automatically lower back down and continue toasting without interrupting
the cycle.
NOTE: The QuickView™ function can be activated a maximum of
three times during a toasting cycle. Operating the QuickView™ function
more than once will affect the toast color.
+30 Secs
The +30 SECS function allows you to extend the toasting time by
30 seconds.
If selected during toasting cycle:
• The +30 Secs LED indicator will flash. Current shade countdown will
be paused. Upon completion of the 30-second cycle, the originally
selected browning shade cycle will resume.
If selected after toasting cycle has completed:
• The +30 Secs LED indicator will light and shade setting will disappear.
Once toasting begins the +30 Secs indicator will flash until time has
elapsed.
6