Method 2. Connecting Using An Optical Cable - Samsung HW-Q70T Manual Del Usuario

NOTES
• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 5.1.2 channels are outputted.
When Dolby Atmos® is active, the Soundbar's sound effect modes controlled by the SOUND
MODE button are not available.
• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.
• Configuring Dolby Atmos® on your BD player or other device.
Open the audio output options on the settings menu of your BD player or other device and make
sure that "No Encoding" is selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).

Method 2. Connecting using an Optical Cable

BD / DVD player / Set-top
box / Game console
OPTICAL OUT
1. Use an optical cable (not supplied) to connect the DIGITAL AUDIO IN (OPTICAL) on the Soundbar
main and the OPTICAL OUT port on the external device.
2. Turn on the Soundbar and external device.
3. Select "D.IN" mode by pressing the
4. Your Soundbar will play sounds from the external device.
Top of the Soundbar
Optical Cable
(not supplied)
(Source) button on the top panel or on the remote control.
ENG - 26
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
Bottom of the Soundbar
D.IN