Mounting The Hanging Rope - Mobiclinic PX-02 Manual De Uso

INSTRUCTION MANUAL FOR PULSE OXIMETER/
MANUAL DE USO PARA PULSIOXÍMETRO
Model/Modelo: PX-02

6.3 Mounting the hanging rope

Step 1. Put the end of the rope through the hole.
Step 2. Put another end of the rope through the first one and then tighten it.
Figure 4. Mounting the hanging rope
7 Operating Guide
7.1 Insert the two batteries properly to the direction, and then replace the cover.
7.2 Open the clip as shown in Figure 5.
Figure 5. Put finger in position
7.3 Let the patient's finger put into the rubber cushions of the clip (make sure the finger
is in the right position), and then clip the finger.
7.4 Press the switch button once on front panel.
7.5 Do not shake the finger and keep the patient at ease during the process.
Meanwhile, human body is not recommended in movement status.
7.6 Get the information directly from screen display.
Fingernails and the luminescent tube should be on the same side.