Chauvet Obey 4 D-FI 2.4 Guía De Referencia Rápida página 4

Obey™ 4 D-Fi™ 2.4GHz QRG
Mounting
Mounting
Diagram
Using the
Wireless
Controller
Modes
Preset Colors
RGB Fade
Auto
Chase
RGB Offset
Color Macros
Sound-Override
White or Amber
Strobe-Override
Blackout
Manual
RGBW/RGBA
Before mounting this product, read the Safety Notes. The dimensions for
mounting are included here to aid in installation.
The integrated D-Fi™ 2.4GHz is a wireless transmitter with a range of up to
200 m (656 ft). To use the wireless, press the Sync button or 15 seconds or
until the receiving product(s)' signal LED blinks rapidly.
The Obey™ 4 D-Fi™ 2.4GHz has 11 operating modes. For detailed instructions
on how to use these modes, and how each mode interacts with other modes, read
the User Manual available from www.chauvetlighting.com.
The nine preset color buttons can be used to assign a color to each addressed
fixture or fixture group.
This mode will fade all connected fixtures in unison as the colors change.
This mode uses built-in programs to change each fixture independently among
random colors.
Several color combinations that cycle the LEDs on and off so that the lights
appear to move along a string are available in these preset chases.
RGB Offset is a built-in color fade program that will create a serial chase
through fixtures 1~4.
These preset color macros have varying intensities.
This feature will work in RGB Fade, Auto, and Chase modes and creates a
sound-activated show using the selected automatic mode.
An all-white or all-amber operating mode can create a stable wash or spot for
varying lighting needs.
This mode will product flashes of light at regular intervals. These intervals are
determined by moving the dimmer fader.
Darkens all fixtures.
Set this mode to use a manually selected custom color combination
determined by the positions of the Red, Green, Blue, Amber and
White faders.
4
EN