Bluetooth Pairing - Remote Control - Hayward MICRO Manual De Instalación E Instrucciones

5. PUTTING IN SERVICE (continued)
10. After running for several minutes, verify that the air exiting the unit is cool
(between 5°C and 10°C). After 30 min. to a few hours, you may see water
dripping beneath the heat pump. This is from normal condensation.
11. With the heat pump operating, turn off the filter pump. The heat pump
should automatically turn off and display error code E03.
12. Turn the filtration pump back on. The error code should disappear and the
heat pump should start again.
13. Have the heat pump and filtration pump run 24/7.
14. When the water inlet temperature reaches the set value, the heat pump
will turn off.
15. It will automatically restart (as long as the filtration pump is running) if the
pool temperature is at least 0.5°C below the set temperature.

5.3 Bluetooth pairing - Remote control

The heat pump is equipped with a Bluetooth feature.
Using the "EyesPool Inverter Connect" app, you can use your smartphone as
a remote control to control your heat pump from an unobstructed range up to
10 m.
To use this
► Download the "EyesPool Inverter Connect" application for free from
or
► Create an account in the app.
► Follow the video instructions (links below) to pair your smartphone with the
heat pump:
FR https://www.hayward.fr/article/videos/micro-bluetooth-connexion
EN https://www.hayward-pool.co.uk/article/videos/micro-bluetooth-connection
14
feature:
.