Taurus SLIMLOOK KERATINE PRO Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
Hair straightener
Slimlook Keratin Pro
DESCRIPTION
A Tilting straightening plates
B On/Off button
C LCD screen
D Temperature setting buttons (+/-)
E Temperature lock button (–) *
F Plate lock button
G Heat-resistant pad
(*) Once the temperature has been selected, to lock it press E (-) but-
ton for 3 seconds and a padlock will appear. To unlock the temperatu-
re, press button E (-) again and the padlock will disappear.
The plate lock must not be selected when switching the hair straighte-
ner off completely.
USE AND CARE:
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if the on/off switch does not work.
- For maximum efficiency, the plates reach the temperature used
by professionals (220ºC). Do not touch the plates or the case
covering them, as they reach very high temperatures. Be sure
that the plates do not touch your eyes or bare skin while using the
appliance.
- While operating, the plates may reach temperatures of up to
220ºC. The plastic parts near the ceramic plates may also be hot.
We recommend resting your hand on the temperature control zone
- Never leave the appliance outdoors and exposed to the elements.
- Under no circumstances should you use flammable substances
(gel, etc.) on your hair before using the straighteners.
- Never leave the appliance on a wet surface or cloth while it is
plugged in.

Publicidad

Tabla de contenido
loading

Tabla de contenido