Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK CONFIGURATION GUIDE. DT-504B.
3
NAVIGATION AND EDITION OF VALUES
3.1
Control Module
The DT-800 control module configures the DT-504B module:
1.-
After assembling and connecting, turn on the DT-800. After
scanning, check the DT-504B module appears in the list of
modules shown on the screen.
2.-
Press ENTER
access password (password by default "2008"). If the password is
right you will access to the configuration menu.
3.-
Use RIGHT
finding the DT-504B. The LED "Program" of the DT-504B
module should be flickering when the module appears on screen.
4.-
Press ENTER
DT-504B.
For more information, refer to the manual supplied with the DT-800
unit control.
3.2
Navigating through the configuration menu
•
Press the LEFT
options.
•
To get into a menu option, press the ENTER
key.
•
To validate a change and exit, press the ENTER
•
To exit without validating press the ESCAPE
3.3
Editing a numeric field
1.-
Press the ENTER
11/2012
to get into the Password option and enter the
or LEFT
to move among modules, until
to get into the configuration option of the
or RIGHT
key to get into a menu option.
key to move between menu
or DOWN
key.
key.
Page 7
Publicidad
Tabla de contenido
