DJI Datalink 3 Guia De Inicio Rapido página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Datalink 3
DJI Datalink 3 is a long range downlink system capable of transmitting data at
distances up to 2.49 mi (4 km)*. It is compatible with DJI flight controllers ** and other
non-DJI flight controllers with SBUS protocol ***.
Datalink 3 includes a Ground System and an Air System, which can be operated at
the frequency of 2.4 GHz. The multi-functional ports on the Air System can satisfy user
requirements in a variety of applications***. Datalink 3 integrates the remote controller
module into the Ground System, which comes with a number of aircraft and gimbal
controls as well as some customizable buttons. By using channel settings, i.e. DJI
ASSISTANT™ 2 for DJI series flight controllers, the buttons on the remote controller
can be customized to perform common functions used in photography, mapping,
agriculture, etc. When used with either DJI MG or GS Pro apps, users will be able to
see and adjust settings in real time, completing complex tasks more easily. The remote
controller has a maximum working time of 15 hours.
Ground System (Remote Controller)
8
7
1
3
2
4
5
6
1. Power Button
2. RTH Button
3. SW2 Switch
4. Status LED
5. Battery Level LEDs
6. Charging Port
7. Control Sticks
8. Mobile Device Holder
9. Small Device Positioning Tabs
10. Antennas
11. Handle Bar
12. LW Dial
13. RW Dial
* Refer to Specifications for details on supported DJI series flight controllers.
** The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area
with no electro-magnetic interference, and at an altitude of about 100 meters.
*** The CAN port on the Air System is currently only compatible with DJI official equipment. The UART
port is currently not supported, but will be added in future firmware update. Please visit the official
website for latest information.
9
10
11
18
19 20
21
12
LW
D
15
14
14. D Button
15. SW1 Switch
16. A Button
17. B Button
18. C1 Button
19. Micro USB Port
20. CAN/UART Port
21. USB Port
22. C2 Button
Some buttons are customizable
via channel setting.
22
13
RW
B
A
16
17
3

Publicidad

Tabla de contenido
loading

Tabla de contenido