Tabla de contenido
Publicidad
x900 Series Switch and SwitchBlade
About this Guide
This Installation and Safety Guide describes how to install and log in to the
following switches:
■
AT-8948
■
x900-48FE
■
x900-48FE-N
■
x900-48FS
■
AT-9924T
■
AT-9924SP
You can download the complete document set for x900 Series switches and
SwitchBlade x908 from www.alliedtelesis.com/support/software. For more
information about the document set and other resources, see
Documentation and Resources" on page
Package Contents
Depending on the model, the switch is factory-fitted with the following power
supply and fan options:
■
AT-8948, AT-9924Ts, x900-24XT, x900-24XT-N, and x900-24XS switches
have a PSU and a FOM installed.
■
AT-9924T, AT-9924SP, x900-48FE, x900-48FE-N, and x900-48FS switches
have a PSU and a blanking plate installed.
■
x900-12XT/S has a fixed PSU installed.
■
SwitchBlade x908 has dual chassis fan modules and blanking plates installed,
but no PSUs. Power supplies must be ordered separately.
Power supply units (PSU) can be:
■
AT-PWR01, either AC or DC
■
AT-PWR02 AC
■
AT-PWR05 AC
How to install a PSU or fan in the switch is described in the Removable Power
Supply and Fan Installation Guide.
4
®
x908
■
■
■
■
■
■
23.
x900-12XT/S
AT-9924Ts
x900-24XT
x900-24XT-N
x900-24XS
®
SwitchBlade
x908
"Obtaining
Publicidad
Tabla de contenido
