Peggy Sage 144076 Instrucciones De Uso página 10

WARNING : to reduce the risk of burning, electrocution, or
injury :
• Do not leave the device without supervision.
• Do not pull on the USB cord.
• Do not use the device if its power cord is damaged, if the timer is faulty or
if it is not working properly.
• Keep the USB cord away from any source of heat.
• Always unplug after use.
• Do not use the device if it is damaged, or if it has fallen or fallen into water.
Return the device to the repair department.
• Do not use outside or anywhere where aerosols or oxygen are in use.
4. Using the dryer for the first time
1. Remove the plastic protection tabs.
2. Position the lamp with the opening facing the user.
3. Insert the plug into the USB port.
4. This lamp is fitted with a sensor, switching on automatically when the
hand is placed underneath. 30 s timer.
5. Disposing of your lamp
To preserve, protect and improve the quality of the environment and to
safeguard human health and make careful use of natural resources, the user
is requested to take this device to an appropriate waste-recycling centre in
compliance with the applicable regulations. The crossed-out waste bin
symbol means that this product must be treated separately and not as
household waste.
6. Precautions
The following precautions must be taken :
- UV 1 devices are designed for use at tanning studios, beauty salons and
similar premises under the supervision of a person who has completed
appropriate training; they may not be sold to the general public.
- The lamp may be damaged if the input voltage does not remain constant.
- Unplug the lamp if it is not used for a long period. Never try to dismantle
10