Guarantee; Use Of The Machine; Safety Regulations - River MISTRAL Manual De Usuario

3. GUARANTEE

riversystems.it
The guarantee is no more valid if the machine is used for other than intended use.
At the time of delivery, check the machine for possible transport damages.
Any claim shall be sent to River Systems srl in writing within 8 (eight) days of receipt.
The guarantee is valid for 12 months from the purchase date. The guarantee decays if the instructions given in
this manual are not respected and/or if the machine is modified or if non original spare parts are used.
The guarantee does not include the electrical components.
riversystems.it
For any dispute the place of jurisdiction shall be Padova (Italy).

4. USE OF THE MACHINE

riversystems.it
The grinding mill MISTRAL is used for the domestic preparation of flours with various thickness for animal feed.
It can grind very thin flours or crush cereals and other dry products. The obtained product is of high quality,
suitable for the preparation of animal feed and whole wheat.
NOTE:
THE GRINDING MILL CAN BE PLUGGED TO ANY HOUSEHOLD SINGLE-PHASE
220V/50HZ POWER OUTLET. PLEASE MAKE SURE THAT THE SWITCH IS IN OFF
POSITION BEFORE PLUGGING IT.
riversystems.it
WARNING!
DO NOT USE THIS MILL TO GRIND WOOD BRANCHES, PLASTIC OR FERROUS
MATERIAL.
DO NOT LET THE MOTOR OVERHEAT. USE THE GRINDING MILL FOR MAXIMUM 30
MINUTES / 1 HOUR WITHOUT INTERRUPTION, ACCORDING TO THE STRESS THE
MOTOR IS SUBJECTED TO; LET THE MOTOR COOL FOR 10-15 MINUTES BEFORE
RESTARTING GRINDING.
riversystems.it
The size of the product is regulated by the internal interchangeable holed sieve. The performance of the
machine is determined by the type of sieve used and by the product to be ground.
Minors are not allowed to use the grinding mill.
Any arbitrary modification to the machine relieves the manufacturer of any blame for any subsequent damage.
riversystems.it
NOTICE:
BEFORE USING THE GRINDING MILL, IT IS NECESSARY TO WEAR HEARING
PROTECTIONS, DUST MASK, WORK GLOVES AND FACE SHIELD.
USE THE MILL IN WELL AIRED PLACES ONLY!
4A - SAFETY REGULATIONS riversystems.it
In order to avoid accidents, please pay attention to the directions specified on the safety labels applied on the
machine.
The noise level of the machine is of about 85 | 90 dB (A) while working.
NOTE:
SWITCH THE MOTOR OFF AS SOON AS THE MILL HAS FINISHED GRINDING (THE REVS
OF THE MOTOR INCREASE). UNPLUG IT BEFORE UNFASTENING THE METAL BELT AND
LIFTING THE UPPER PART OF THE MILL IN ORDER TO PREVENT THE ACCIDENTAL
STARTING UP OF THE MOTOR.
riversystems.it
WARNING!
BEFORE ANY CLEANING OR MAINTENANCE OPERATION, MAKE SURE THAT THE
MOTOR IS OFF AND THE MACHINE UNPLUGGED.
PLEASE MAKE SURE THAT ALL THE GUARDS ARE INSTALLED AND INTACT.
riversystems.it
Please remember that a careful user is the best safety against any accident.
NOTICE:
DO NOT USE THE GRINDING MILL UNDER THE RAIN OR IN A VERY HUMID ROOM OR
WHERE THERE ARE FLAMMABLE GASES OR LIQUIDS.
DO NOT USE THE GRINDING MILL WITH WET HANDS.
riversystems.it WAIT UNTIL THE MACHINE IS COLD BEFORE CHANGING THE SIEVE OR MAKING ANY
MAINTENANCE OPERATION.
BEFORE STARTING THE GRINDING MILL, PLACE IT ON A SOLID AND SAFE FLAT
riversystems.it
Copyright © 2019 River Systems - All rights reserved
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
riversystems.it
- 15 -
riversystem
riversystems
riversystems.it
riversystem
riversystems
riversystems.it
riversystems.
riversystems.it
riversystems
EN