Replacement Of The Sieve; Replacement Of The Blade; Replacement Of The Motor Carbon Brushes - River MISTRAL Manual De Usuario

6C - REPLACEMENT OF THE SIEVE
riversystems.it
WARNING!
BEFORE CARRYING OUT THIS OPERATION, MAKE SURE THAT THE MOTOR IS OFF
AND THE MACHINE IS UNPLUGGED.
riversystems.it
EN
riversystems.it
6D - REPLACEMENT OF THE BLADE
WARNING!
riversystems.it
BEFORE CARRYING OUT THIS OPERATION, MAKE SURE THAT THE MOTOR IS OFF
AND THE MACHINE IS UNPLUGGED. WEAR WORK GLOVES TO AVOID BEING INJURED
BY THE BLADE.
riversystems.it
riversystems.it
6E - REPLACEMENT OF THE MOTOR CARBON BRUSHES
WARNING!
BEFORE CARRYING OUT THIS OPERATION, MAKE SURE THAT THE MOTOR IS OFF
riversystems.it AND THE MACHINE IS UNPLUGGED.
This operation shall be carried out by specialized personnel.
1. Unfasten the metal
belt and lift the upper
part of the mill.
riversystems.it
5. Reassemble the mill
with care.
1. Unfasten the metal
belt and lift the upper
part of the mill.
riversystems.it
5. Reassemble the mill
with care.
riversystems.it
riversystems.it
riversystems.it
riversystems.it
2. Unscrew the wing
nuts that secure the
sieve and remove it.
3. Replace the worn
sieve with a new one
(original) or with one
riversystems.it
with different holes.
4. Insert the new sieve
and secure it with the
wing nuts.
riversystems.it
riversystems.it
2. Unscrew the wing
nuts that secure the
sieve and remove it.
3. Unscrew the bolt that
secures the blade to the
motor shaft. Remove
the blade. Make sure
riversystems.it
not to lose any washer.
4. Replace the blade
with an original spare
one. Reinsert the
washers, blade and
wing nuts as shown in
the picture on the right.
riversystems.it
riversystems.it
riversystems.it
- 18 -
riversystem
riversystems.it
riversystem
riversystems.it
riversystems.
Copyright © 2019 River Systems - All rights reserved
riversystems.it
riversystems
riversystems
riversystems