Ecor Pro EPD150 Manual Del Usuario página 4

HOW IT WORKS EPD150/EPD150-PRO |
Your EPD Desiccant dehumidifier removes
moisture using a continuously rotating moisture
absorbing wheel —this 'Desiccant Rotor' is
literally a honeycomb of extremely hygroscopic
membranes.
A highly efficient yet low noise fan draws air
into the unit (Process Air) and forces it through
a portion of the absorbent rotor. As the air
passes through the rotor, the honeycomb of
hygroscopic membranes absorb almost all
of the moisture creating an extremely dry air
stream.
Most of this air stream is discharged directly
through the 'Dry Air Outlet' however, a portion
of this air (Regen Air) is separated and directed
through a heater bank (Regen Heater) where it's
temperature is raised. This air is then channeled
back through a section of the rotor. As this
air passes back through the membranes, its
higher temperature drives-out the previously
absorbed moisture and discharges it as warm
wet air through the 'Wet Air Out' duct.
As the wheel rotates, this process of collecting
and discharging moisture is continuous.
4