Other Functions; Adjusting The Sound Characteristics; Enjoy Bass And Treble Even At Low Volume; Loudness Function - Sony CDX-3700 Manual De Instrucciones

Other Functions

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader. You can store the bass and treble levels.
Each source can store the bass and treble levels
independently.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
BAS (bass) n TRE (treble) n
BALANCE (left-right) n
FADER (front-rear) n VOL (volume)
2
Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting
the item. (After three seconds, the buttons
function reverts to volume control.)
Enjoy bass and treble
even at low volume

— Loudness Function

Press (LOUD) until "LOUD" appears.
Bass and treble will be reinforced.
To return to normal mode, press again until
"LOUD" disappears.

Cancel the beep sound

Press (6) while pressing (SOUND).
To obtain the beep sound again, press these
buttons again.
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be deactivated.
8

Attenuating the sound

Press (ATT).
"ATT on" lights up.
To restore the previous volume level, press
(ATT) again.
Turning on the clock
display
— Power Select Function
Only for cars with an accessory position on the
ignition key switch
To turn the Power Select Function ON
Press (3) while pressing (SOUND).
The Power Select Function ties the clock
display power to the accessory position on
the ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.