Intended Use; Environmental Protection - GreenWorks Tools 3600107a Manual De Utilización

SAFETY INSTRUCTIONS FOR BATTERY PACK
■ Do not dismantle, open or shred secondary battery
pack.
■ Do not expose battery pack to heat or fire. Avoid
storage in direct sunlight.
■ Do not short-circuit battery pack. Do not store battery
pack haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by other
metal objects.
■ Do not remove battery from its original battery pack
enclosure required for use.
■ Do not subject battery pack to mechanical shock.
■ In the event of leaking, do not allow the liquid to come
in contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts
of water and seek medical advice.
■ Do not use any charger other than that specifically
provided for use with the equipment.
■ Observe the plus (+) and minus (–) marks, battery and
equipment and ensure correct use.
■ Do not use any battery pack which is not designed for
use with the equipment.
■ Do not mix battery pack with different manufacture,
capacity, size or type within a device.
■ Keep battery pack out of the reach of children.
■ Seek medical advice immediately if battery pack has
been swallowed.
■ Always purchase the correct cell or battery for the
equipment.
■ Keep battery pack clean and dry.
■ Wipe the battery pack terminals with a clean dry cloth
if they become dirty.
■ Secondary battery pack need to be charged before
use. Always use the correct charger and refer to the
manufacturer's instructions or equipment manual for
proper charging instructions.
■ Do not leave a battery pack on prolonged charge when
not in use.
■ After extended periods of storage, it may be necessary
to charge and discharge the cells or battery pack
several times to obtain maximum performance.
■ Secondary battery pack give their best performance
when they are operated at normal room temperature
(20 °C ± 5 °C).
■ Retain the original product literature for future
reference.
English (Original Instructions)
8
SERVICE
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
SPECIAL SAFETY RULES
■ Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring. Cutting accessory
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
■ Protect your lungs. Wear a face or dust mask if the
operation is dusty.

INTENDED USE

You may use this product for the purposes listed below:
■ Cutting all types of wood
■ Cutting plastic
■ Cutting drywall
■ Cutting metals
MAINTENANCE
■ When servicing, use only identical Greenworks Tools
replacement parts. Use of any other parts may create
a hazard or cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
■ Do not attempt to modify this tool or create accessories
not recommended for use with this tool.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOL
V
Safety alert
Volts
Reciprocations per minute
Direct current