HUSABERG 69029096040 Manual Del Usuario página 6

2
PC
6
NOTE:
For a variety of applications on the PC, the plug-in connector (5) for the ignition must be closed --> ignition on. If the ignition is not
required, disconnect the plug-in connector, as the battery will otherwise discharge. To save battery power while the ignition is swit-
ched on, switch off all power consumers such as the lights, turn signals, etc. To use the software on a PC, you will also need the asso-
ciated software It can be downloaded directly from the HUSABERG homepage at www.husaberg.com. Also available on the HUSA-
BERG homepage www.husaberg.com is a detailed installation and operating manual of the software.
Mounting the UST adapter for use on the PC
- Connect the diagnosis plug-in cable (4) with the motorcycle cable harness
- Connect the USB cable (2) with the UST adapter (1).
1
NOTE:
To connect the USB cable, pull the movable part (6) of the UST adapter up
6 and fold it to the side.
- Connect the USB cable with the PC.
UST-
Adapter (1)
USB (2)
Diagnosis
connector
and the UST adapter (1).
ECU communication
cable (4)
ECU
ignition plug (5)
Vehicle