Safety - BRAND macro Instrucciones De Manejo

2 Safety

2 Safety
Please read carefully!
The macro can be used in combination with hazardous materials, work
processes and equipment. However, the operating manual cannot cover
all of the safety issues that may occur in doing so. It is the user's responsi-
bility to ensure compliance with the safety and health regulations and to
specify the corresponding restrictions before use.
1. Every user must read and observe this operating manual before us-
ing the device.
2. Follow the general hazard instructions and safety regulations (e.g.,
wear protective clothing, eye protection, and protective gloves).
3. Follow the instructions given by the reagent manufacturer.
4. Use the device only for pipetting liquids and only within the defined
limits of use. Comply with the operating exclusions; see Operating
exclusions, p. 31 . In case of doubt, contact the manufacturer or
dealer.
5. Always perform work in a manner that does not endanger the user or
other people. Avoid splattering. Use only suitable vessels.
6. Never use force.
7. Use only original accessories and original replacement parts. Do not
make any technical modifications. Do not disassemble the device
further than described in the user manual!
8. Always check that the device is in proper working condition before
use. If the device malfunctions, stop pipetting immediately and refer
to the section Malfunction – what to do?, p. 41 . If necessary, con-
tact the manufacturer.
Operating manual
30
9976 40