EN
20
Board Folding Steps
•
The board storage bag is designed to allow you to get your board into
the bag as easily as possible with minimal folds.
•
Follow the diagram below for the best folding procedures
•
Make your folds so that the folding pattern will match the Deck Plate.
Do not try and fold or bend deck plates. Always use the supplied side fin
covers to prevent fin damage and bending.
CARE AND CLEANING
The PVC provides superior protection from ultraviolet light. However, to
ensure extra years of flexibility and bright colors, avoid storing the board
where it will be exposed to weather or in direct sunlight. Please review the
following list for storage and board care tips.
•
Before storing, hose off the board and let it dry completely to prevent
mildew buildup.
•
Do not use harsh chemicals for cleaning. Most dirt can be removed with
a mild soap and fresh water.
•
You may store the board inflated or deflated. If you deflate the board,
we recommend that you store it in the protective bag that came with the
board
•
If storing the board outdoors, raise it up off the ground and cover it with
a tarp to prevent exposure to the elements
•
We do not recommend hanging the board.
•
Do not store in extreme conditions (i.e. above 150°F or below -10°F)
•
Store in a clean, dry place.