Control Module - Promax DT-311 Guía Rápida De Configuración

3. NAVIGATION AND EDITION OF VALUES
3.1

Control Module

The DT-800 control module configures the DT-311/312 module:
1.- After assembling and connecting, turn on the DT-800. After
scanning, check that appears the DT-311/312 module on the list
on the screen.
2.- Press ENTER
access password (password by default "2008"). If the password is
right you will access to the configuration menu.
3.- Use RIGHT
finding
DT-311/312 module should be flickering when the module
appears on screen.
4.- Press ENTER
DT-311/312.
For more information, refer to the manual supplied with the DT-800
control module.
3.2 Navigation through the configuration menu
• Press the LEFT
options.
• To exit a menu option, press the ENTER
• To validate a change and exit, press the ENTER
• To exit without validating press the ESCAPE
3.3 Editing a numeric field
1.- Press the ENTER
Page 6
QUICK CONFIGURATION GUIDE DT-311/312
to get into the Password menu and enter the
or LEFT
the DT-311/312.
to get into the configuration option of the
or RIGHT
key to get into a menu option.
to move among modules, until
The LED "Program"
key to move among the menu
or DOWN
key.
of the
key.
key.
12/2011