Setting User Information - HoMedics PDM-200B Manual De Usario

SETTING USER INFORMATION

1. Press the MODE button until the word
INFO is displayed on the screen. Press
and hold the ADJUST button for 2
seconds until the number representing
the AGE starts to blink.
2. To increase the AGE, press the ADJUST
button. Each press will increase the
number by one in a cycling manner.
Pressing the MODE button will confirm
the entry.
3. Next, the screen will display UNIT,
followed by LB. LB represents all of the
information in the pedometer being in
Imperial format. To change to metric
format, press the ADJUST button. To
confirm the entry, press the MODE
button.
Note: By selecting LB, all information
will be displayed in the Imperial format.
By selecting KG, all information will be
displayed in Metric format.
11
4. After selecting the unit format, the
number representing the WEIGHT will
start to blink. Press the ADJUST button to
increase the selection in a cycling manner,
and press MODE button to confirm entry.
5. Next, the word WALK will be displayed
on the screen, followed by the number
representing the WALK STRIDE LENGTH
will start to blink. Adjust this number in the
same way as described in step 2.
6. The display will show RUN and the
number representing the RUN STRIDE
LENGTH will start to blink. Change this
value in the same way as described in
step 2.
Note: For more information on
how to calculate STRIDE LENGTH, see
CALCULATING STRIDE LENGTH section.
7. Next, GOAL will be displayed on the
screen, and the daily goal value for the
ten thousandth value will start to blink.
Change the rest of the values in the same
way as mentioned in step 2. Press the
MODE button to confirm your entry.
12