FIC K8M-800T/M Manual página 36

K8M-800T/M Mainboard Manual
DDR Timing Setting by
This feature allows you to decide DRAM clock timing.
The options are: Auto, Manual.
Max Memlock (Mhz)
This feature allo ws yo u to place an artificial memory clock limit on the
system. Memory is presented from running faster than this frequency.
The options are: 100, 133, 166, 200.
AGP & P2P Bridge Control
AGP Aperture Size
This feature d efines th e size of the aperture if you use an AGP graphics
adap ter. It refers to a s ection of the PCI memo ry address ran ge used for
graphics memory. The options are: 32M, 64M, 128M, 256M.
AGP Mode
Chipset AGP Mode support. The options are: 1X, 2X, 4X.
AGP Driving Control / AGP Driving Value
These two features allow you to manually improve the performance of AGP
card manually by pressing the Pag e Down/Page Up key if necessary.
The options of AGP Driving Control are: Auto, Manual.
AGP Fast Write
This feature allows you to set AGP fast write mode.
The options are: Disabled, Enabled.
AGP Master 1 WS Write
When enab led, the AGP bus master write access to DRAMs will add one
wait-state cycle. The options are: Enabled, Disabled.
AGP Master 1 WS Read
When enabled, the AGP bus master read access to the DRAMs will add one
wait-state cycle. The options are: Disabled, Enabled.
3 - 8