Function
This locomotive comes with a sine propulsion
system and offers these features :
G
Can be operated with conventional AC power
(32 VA transformer, item no. 6647 or 6646),
Märklin Delta or Märklin Digital. The circuit board
in the locomotive automatically recognizes the mode
of operation. This locomotive is not designed for
operation with locomotive controllers for other
systems (DC power, pulse width control, multi-
train controls of other makes).
G
Headlights that change over with the direction of
travel can be turned on / off in digital operation or
in operation with the Delta-Control 4 f (Nr. 66045).
The headlights will vary in brightness with the speed
of the locomotive when the latter is operated
with AC power. The headlights are off at all
times when the locomotive is operated with the
6604 Delta-Control. The headlights are on at all
times when the locomotive is operated with the
6607 Delta-Station.
G
The Delta and Digital address can be set manually
with coding switches on the electronic circuit.
G
Adjustable maximum speed.
G
Adjustable acceleration / braking delay.
G
Brushless motor, needs no servicing.
Only in operation with the 6021 Control-Unit :
G
Directionally dependent headlamps switchable
via function.
G
Sound of a horn can be turned on and off.
G
Switching range (canceling of the acceleration /
braking delay that has been set for the locomotive).
The maintenance work required with normal
operation is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.
5