Metra INST-581FD Instrucciones De Instalación

Ford/lincoln/mercury 2004-2008

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART INST-581FD
Ford/Lincoln/Mercury 2004-2008
AT-581FD/AW-581FD/CF-581FD/IBR-581FD
KIT FEATURES
• Double DIN radio provision
• Stacked ISO units provision
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio housing (Double DIN and stacked ISO DIN) • B) Double DIN brackets • C) Spacers
• D) (4) Screws • E) Radio housing • F) ISO brackets • G) Trim plate
A
B
F
G
METRA. The World's best kits.
APPLICATIONS
See application list inside
C
D
1-800-221-0932
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• Please visit www.metraonline.com for specific
interface applications
Antenna Adapter:
• 40-CR10 - Chrysler antenna adapter 2002-up
TOOLS REQUIRED
• Cutting tool • Panel removal tool
• Phillips screwdriver • Socket set
E
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

Publicidad

Capítulos

Tabla de contenido
loading

Resumen de contenidos para Metra INST-581FD

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART INST-581FD APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Ford/Lincoln/Mercury 2004-2008 Wiring Harness: AT-581FD/AW-581FD/CF-581FD/IBR-581FD • Please visit www.metraonline.com for specific interface applications KIT FEATURES Antenna Adapter: • Double DIN radio provision • 40-CR10 - Chrysler antenna adapter 2002-up • Stacked ISO units provision • DIN radio provision with pocket • ISO DIN radio provision with pocket TOOLS REQUIRED • Cutting tool • Panel removal tool • Phillips screwdriver • Socket set KIT COMPONENTS • A) Radio housing (Double DIN and stacked ISO DIN) • B) Double DIN brackets • C) Spacers...
  • Página 2: Tabla De Contenido

    INST-581FD Applications Table of Contents Ford Mercury Dash Disassembly - Mercury Monterey 2004-2007 .........5 Edge ......2007-2008 Milan ......2006-2008 - Ford Edge/Expedition 2007-2008 ......3 - Mercury Montego 2005-2007 ........4 Expedition ....2007-2008 Mountaineer ....2006-2008 - Ford Explorer/Explorer Sport Trac 2006-2008 ..6 - Mercury Sable 2008 ..........4 Explorer ......2006-2008 Monterey ......2004-2007 - Ford F-150 2004-2008 ..........3 Kit Assembly Explorer Sport Trac ..2006-2008...
  • Página 3: Ford Edge/Expedition 2007-2008

    Dash Disassembly INST-581FD Ford F-150 2004-2008, Ford Mustang 2005-2009 Ford Expedition/Edge 1. Remove the small rectangular shifter 2007-2008, Lincoln Mark lever trim panel if equipped. (Figure A) LT 2005-2008 2. Remove (2) Phillips screws from under the center armrest at the back of the 1. Unsnap and remove entire panel surrounding the shifter trim panel (including cup holders). radio and climate controls. (Figure A) (Figure B) 2. Remove (4) 9/32” screws to remove the factory (Figure A) radio. (Figure B) 3. Unclip and remove panel. (Figure B) Continue to kit assembly 4. Unclip and remove the (2) center stack trim panels from the left and right side of the radio and climate controls. (Figure C)
  • Página 4: Ford Five Hundred 2005-2007

    Dash Disassembly INST-581FD Ford Five Hundred 2005-2007/Taurus 2008 Ford Fusion 2006-2008 Mercury Montego 2005-2007/Sable 2008 Mercury Milan 2006-2008 1. Unclip and remove the small rectangular 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) trim around shift lever. (Figure A) 2. Remove (4) 9/32” screws to remove the factory 2. Unclip and remove the entire panel radio. (Figure B) (including cup holders) surrounding the shift lever. (Figure B) Continue to kit assembly (Figure A) 3. Remove (2) 9/32” screws at the bottom of the center radio/climate control panel.
  • Página 5: Ford Freestar 2004-2007

    Dash Disassembly INST-581FD Ford Freestyle 2005-2007 Ford Freestar 2004-2007 Ford Taurus X 2008 Mercury Monterey 2004-2007 1. Unclip and remove entire panel 1. Unsnap and remove entire panel surrounding the radio and climate surrounding the radio and A/C controls. (Figure A) controls. (Figure A) 2. Remove (4) 9/32” screws 2. Remove (4) 9/32” screws from to remove the factory radio. radio to remove. (Figure B) (Figure B) Continue to kit assembly Continue to kit assembly (Figure A)
  • Página 6: Ford Explorer/Explorer Sport Trac 2006-2008

    Dash Disassembly INST-581FD Ford Focus 2005-2007 Ford Explorer/Explorer Sport Trac 2006-2008, Mercury Mountaineer 1. Unsnap and remove entire panel 2006-2008 surrounding the radio and climate controls. (Figure A) 1. Open center console and remove 2. Remove (4) 9/32” screws (2) Phillips screws then unclip and to remove the factory radio. remove entire panel surrounding (Figure B) shifter. (Figure A) Continue to kit assembly 2. Remove dash panel surrounding radio to access the factory radio screws. (Figure B) (Figure A) 3. Remove (4) 9/32” screws to remove the factory radio.
  • Página 7: Ford F-Series Super Duty 2005-2008

    Dash Disassembly INST-581FD Ford F-Series Super Duty 2005-2008 Ford Super Duty 2008 1. Unsnap and remove entire panel 2. Remove (4) 9/32” screws 1. Unclip and remove the power 3. Unclip and remove the entire radio to remove the factory radio. outlet panel and the blank panel on trim panel including the A/C control surrounding the radio and climate (Figure B) the left and right side of the radio and vents. controls. (Figure A) trim panel. (Figure A) 4. Remove (4) 9/32” screws securing Continue to kit assembly 2. Remove the (2) 9/32” screws the radio. exposed behind the two panels Continue to kit assembly previously removed.
  • Página 8: Lincoln Mkx 2007-2009

    Dash Disassembly INST-581FD Lincoln MKX 2007-2009 Lincoln Navigator 2007-2008 1. Open center console lid and unclip and remove the center console 1. Unclip and remove the panel surrounding the shifter. (Figure A) trim panel surrounding the shifter. (Figure A) 2. Remove (2) 9/32” screws from the bottom of the radio/climate control trim panel. (Figure B) 2. Remove (2) Phillips screws from the storage bin then unclip and 3. Unclip and remove the entire panel surrounding the radio and including the remove the bin. (Figure B) climate controls. (Figure B) 3. Unclip and remove the upper and 4. Remove (4) 9/32” screws securing the radio. Unplug and remove the Radio. lower center trim panel as one assembly. (Figure C) Continue to kit assembly 4. Remove (4) 9/32” screws securing the radio. Unplug and (Figure B) remove the radio.
  • Página 9: Double Din Radio Provision

    Kit Assembly INST-581FD Double DIN radio provision 1. For the 2007 Ford Edge/ 2. For the 2007 Ford Edge/ 3. Attach the double DIN brackets to the 5. Locate the factory wiring harness in Expedition, 2006-2007 Explorer/ Expedition, 2006-2007 Explorer, the dash. Metra recommends using radio housing. (Figure B and C) Fusion/Mercury Milan, 2004- 2006-2007 Fusion, 2007 the proper mating adapter from 2007 F-150, 2005-2007 Five Note: The notch in the housing Mustang and the 2008 Super Metra or AXXESS. Re-connect the...
  • Página 10: Stacked Iso Unit Provision

    Kit Assembly INST-581FD Stacked ISO units provision 1. For the 2007 Ford Edge/ 2. For the 2007 Ford Edge/ 3. Attach the double DIN brackets to the 5. Locate the factory wiring harness in Expedition, 2006-2007 Explorer/ Expedition, 2006-2007 Ford the dash. Metra recommends using radio housing. Fusion/Mercury Milan, 2004- Explorer, 2006-2007 Ford Fusion, the proper mating adapter from 2007 F-150, 2005-2007 Five Note: The notch in the housing 2007 Mustang and the 2008 Metra or AXXESS. Re-connect the...
  • Página 11: Din Radio Provision With Pocket

    Kit Assembly INST-581FD DIN radio provision with pocket 1. (a) For the Ford Edge/Expedition (b) For the Ford Freestar 2004- 2. Slide the DIN cage into the Radio the proper mating adapter from 2007, Explorer 2006-2007, Fusion 2007, Monterey 2004-2007, Focus Housing and secure by bending the Metra or AXXESS. Re-connect the 2006-2007, Mustang 2007 and 2005-2007, and the F-Series Super metal locking tabs outward. negative battery terminal and test the Super Duty 2008 attach the...
  • Página 12: Iso Radio Provision With Pocket

    Kit Assembly INST-581FD ISO radio provision with pocket 1. (a) For the Ford Edge/Expedition (b) For the Ford Freestar 2004- 2. Mount the ISO Brackets to the head 5. Locate the factory wiring harness in 2007, Explorer 2006-2007, Fusion 2007, Monterey 2004-2007, Focus the dash. Metra recommends using unit with the screws supplied with 2006-2007, Mustang 2007 and 2005-2007, and the F-Series Super the unit. (Figure C) the proper mating adapter from the Super Duty 2008 attach the Duty 2005-2007, slide the included Metra or AXXESS. Re-connect the...
  • Página 13 INST-581FD Notes...
  • Página 14 INST-581FD Notes...
  • Página 15 INST-581FD Notes...
  • Página 16 INSTALLATION INSTRUCTIONS FOR PART INST-581FD NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 17: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD APLICACIONES Lista de aplicaciones dentro CABLEADO Y CONEXIONES DE ANTENA Ford/Lincoln/Mercury 2004-2008 (se venden por separado) Arnés de cableado: AT-581FD/AW-581FD/CF-581FD/IBR-581FD • Visite www.metraonline.com para ver aplicaciones específicas de interfase CARACTERÍSTICAS DEL KIT Adaptador de antena: • Provisión radio doble DIN • 40-CR10 - Cable adaptador de antena • Provisión de radio ISO vertical Chrysler 2002 • Provisión radio DIN con bolsillo • Provisión radio DIN ISO con bolsillo HERRAMIENTAS REquERIDAS • Herramienta de corte • Herramienta de remoción...
  • Página 18 INST-581FD Aplicaciones Índice Ford Mercury Desmontaje del tablero - Mercury Monterey 2004-2007 .........5 Edge ......2007-2008 Milan ......2006-2008 - Ford Edge/Expedition 2007-2008 ......3 - Mercury Montego 2005-2007 ........4 Expedition ....2007-2008 Mountaineer ....2006-2008 - Ford Explorer/Explorer Sport Trac 2006-2008 ..6 - Mercury Sable 2008 ..........4 Explorer ......2006-2008 Monterey ......2004-2007 - Ford F-150 2004-2008 ..........3 Ensamble del kit Explorer Sport Trac ..2006-2008...
  • Página 19: Desmontaje Del Tablero

    Desmontaje del tablero INST-581FD Ford F-150 2004-2008, Ford Mustang 2005-2009 Ford Expedition/Edge 1. Quite el pequeño panel de la moldura de 2007-2008, Lincoln Mark la palanca de velocidades si se incluye. LT 2005-2008 (Figura A) 2. Quite los (2) tornillos Phillips de debajo 1. Suelte a presión y quite todo el panel que rodea el del descansabrazos central en la parte radio y los controles del clima. (Figura A) posterior del panel de la moldura de la palanca de velocidades (incluyendo los 2. Quite los (4) tornillos de 9/32” para quitar el radio (Figura A) portavasos). (Figura B) de fábrica. (Figura B) 3. Desenganche y quite el panel. (Figura B) Continuará al ensamble del kit 4. Desenganche y quite los (2) paneles...
  • Página 20: Ford Five Hundred 2005-2007

    Desmontaje del tablero INST-581FD Ford Five Hundred 2005-2007/Taurus 2008 Ford Fusion 2006-2008 Mercury Montego 2005-2007/Sable 2008 Mercury Milan 2006-2008 1. Desenganche y quite la pequeña 1. Suelte a presión y quite todo el panel que rodea el radio y los controles del clima. (Figura A) moldura rectangular que rodea la palanca de velocidades. (Figura A) 2. Quite los (4) tornillos de 9/32” para quitar el radio de fábrica. (Figura B) 2. Desenganche y quite todo el panel (incluyendo los portavasos) que rodea la Continuará al ensamble del kit palanca de velocidades. (Figura B) (Figura A) 3. Quite los (2) tornillos de 9/32” de la...
  • Página 21: Ford Freestar 2004-2007

    Desmontaje del tablero INST-581FD Ford Freestyle 2005-2007 Ford Freestar 2004-2007 Ford Taurus X 2008 Mercury Monterey 2004-2007 1. Unclip and remove entire panel 1. Suelte a presión y quite todo el panel que rodea el radio y los surrounding the radio and A/C controles del clima. (Figura A) controls. (Figura A) 2. Quite los (4) tornillos de 9/32” 2. Quite los (4) tornillos de 9/32” del para quitar el radio de fábrica. radio para quitarlo. (Figura B) (Figura B) Continuará al ensamble del kit Continuará al ensamble del kit...
  • Página 22: Ford Explorer/Explorer Sport Trac 2006-2008

    Desmontaje del tablero INST-581FD Ford Focus 2005-2007 Ford Explorer/Explorer Sport Trac 2006-2008, Mercury Mountaineer 1. Suelte a presión y quite todo el 2006-2008 panel que rodea el radio y los controles del clima. (Figura A) 1. Abra la consola central y retire 2. Quite los (4) tornillos de 9/32” los (2) tornillos Phillips, luego desenganche y quite todo el para quitar el radio de fábrica. panel que rodea la palanca de (Figura B) velocidades. (Figura A) Continuará al ensamble del kit 2. Quite el panel del tablero que rodea el radio para tener acceso a los tornillos del radio de fábrica. (Figura A) (Figura B) 3. Quite los (4) tornillos de 9/32”...
  • Página 23: Ford F-Series Super Duty 2005-2008

    Desmontaje del tablero INST-581FD Ford F-Series Super Duty 2005-2008 Ford Super Duty 2008 1. Suelte a presión y quite todo el 2. Quite los (4) tornillos de 9/32” 1. Desenganche y quite el panel del 3. Desenganche y quite todo el panel tomacorriente y el panel de tapa de la moldura del radio, incluyendo para quitar el radio de fábrica. panel que rodea el radio y los del lado izquierdo y derecho del el control y las rejillas del aire (Figura B) controles del clima. (Figura A) panel de la moldura del radio. acondicionado. Continuará al ensamble del kit (Figura A) 4. Quite los (4) tornillos de 9/32” que 2. Quite los (2) tornillos de 9/32”...
  • Página 24: Lincoln Mkx 2007-2009

    Desmontaje del tablero INST-581FD Lincoln MKX 2007-2009 Lincoln Navigator 2007-2008 1. Abra la tapa de la consola central y desenganche y quite el panel de la 1. Desenganche y quite el panel que rodea la palanca de velocidades. (Figura A) moldura de la consola central que rodea la palanca de velocidades. 2. Quite los (2) tornillos de 9/32” de la parte inferior del panel de la moldura de (Figura A) control del radio/clima. (Figura B) 2. Quite los (2) tornillos Phillips del cajón de almacenamiento y luego 3. Desenganche y quite todo el panel que rodea el radio, incluyendo los controles desenganche y quite el cajón. del clima. (Figura B) (Figura B) 4. Quite los (4) tornillos de 9/32” que sujetan el radio. Desconecte y quite el radio. 3. Desenganche y quite el panel superior e inferior de la moldura Continuará al ensamble del kit central como un mismo ensamble.
  • Página 25: Ensamble Del Kit

    Ensamble del kit INST-581FD Provisión radio doble DIN 1. Para 2007 Ford Edge/Expedition, 2. Para 2007 Ford Edge/Expedition, 5. Ubique el arnés de cableado doble DIN a la carcasa del radio. 2006-2007 Explorer/Fusion/ 2006-2007 Explorer, 2006-2007 (Figura B y C) de fábrica en el tablero. Metra Mercury Milan, 2004-2007 Fusion, 2007 Mustang y the recomienda el uso de un adaptador Nota: La muesca de la carcasa debe...
  • Página 26: Provisión De Radio Iso Vertical

    Ensamble del kit INST-581FD Provisión de radio ISO vertical 1. Para 2007 Ford Edge/Expedition, 2. Para 2007 Ford Edge/Expedition, 5. Ubique el arnés de cableado doble DIN a la carcasa del radio. 2006-2007 Explorer/Fusion/ 2006-2007 Ford Explorer, 2006- de fábrica en el tablero. Metra Nota: La muesca de la carcasa debe Mercury Milan, 2004-2007 2007 Ford Fusion, 2007 Mustang recomienda el uso de un adaptador estar en la parte superior.
  • Página 27: Provisión Radio Din Con Bolsillo

    Ensamble del kit INST-581FD Provisión radio DIN con bolsillo 1. (a) Para Ford Edge/Expedition (b) Para Ford Freestar 2004-2007, 2. Deslice la reja DIN en la carcasa recomienda el uso de un adaptador 2007, Explorer 2006-2007, Fusion Monterey 2004-2007, Focus 2005- del radio y sujétela doblando hacia adecuado de acoplamiento de Metra 2006-2007, Mustang 2007 and 2007, and the F-Series Super Duty afuera las pestañas de metal. o de AXXESS. Vuelva a conectar la...
  • Página 28: Provisión Radio Iso Con Bolsillo

    Ensamble del kit INST-581FD Provisión radio ISO con bolsillo 1. (a) Para Ford Edge/Expedition (b) Para Ford Freestar 2004-2007, 2. Monte los soportes ISO en la unidad 5. Ubique el arnés de cableado 2007, Explorer 2006-2007, Fusion Monterey 2004-2007, Focus 2005- central con los tornillos incluidos con de fábrica en el tablero. Metra 2006-2007, Mustang 2007 y 2007, and the F-Series Super Duty la unidad. (Figura C)
  • Página 29 INST-581FD Notas...
  • Página 30 INST-581FD Notas...
  • Página 31 INST-581FD Notas...
  • Página 32 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. Regístrese en Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps www.installerinstitute.com o llame al...

Tabla de contenido