Stacked Iso Unit Provision - Metra INST-581FD Instrucciones De Instalación

1. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer/
Fusion/Mercury Milan, 2004-
2007 F-150, 2005-2007 Five
Hundred/Freestyle/Mustang/
Mercury Montego, 2005-2007
Lincoln Mark LT and the 2008
Ford Super Duty, cut and remove
the rear mounting tabs from the
Double DIN Brackets.
If your vehicle is not listed above
move to Step 2.
(Figure A)
Kit Assembly INST-581FD
Stacked ISO units provision
2. For the 2007 Ford Edge/
Expedition, 2006-2007 Ford
Explorer, 2006-2007 Ford Fusion,
2007 Mustang and the 2008
Super Duty attach the included
spacers to the back of the radio
housing mounting tabs. (Figure A)
If your vehicle is not listed above
move to Step 3.
(Figure B)
3. Attach the double DIN brackets to the
radio housing.
Note: The notch in the housing
should be on top. (Figure B and C)
4. Slide the ISO mount units into the
radio housing/bracket assembly and
secure the units to the assembly
using the screws supplied with the
units. (Figure D)
(Figure C)
10
5. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure D)