Intended Use; Technical Data - ULTIMATE SPEED KH4055 Guia De Inicio Rapido

Intended use

The wheel wrench KH4055 is intended for loosening and
tightening of wheel nuts / bolts during a tyre change.

Technical data

Length:
Wrench widths:
Using the wheel wrench
• Park the vehicle on a level surface, put it in a low gear and
set the hand break.
• Also secure the vehicle against rolling with appropriate
equipment.
Important:
Follow the safety / operating instructions in the operating
manual for your vehicle.
• Loosen the wheel nuts / bolts of the wheel to be changed
in an alternating cross pattern before lifting the vehicle with
the jack.
350 mm - 530 mm
17 mm and 19 mm
8