Troubleshooting; Technical Specifications; Electrical Wiring - Caterlite CE209 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Troubleshooting

If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working
"E2" on Display

Technical Specifications

Model Voltage
CE209 230V
50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Probable Cause
The appliance is not switched
on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Unsuitable cookware
Appliance has overheated
Power
Current
(max.)
1800 W 7.5 A
Check the appliance is plugged in
correctly and switched on
Call Caterlite agent or qualified
technician
Replace the plug fuse
Check power supply
Replace with suitable cookware
Allow to cool for 10 min before
restarting.
Power Temperature
range range
500 -1800W 60-240°C
Action
Dimensions Weight
(h x w x d) mm (kg)
85 x 386 x 328 5.6 kg
UK
4