Operating Instructions - HOESCH SenseEase Serie Instrucciones De Montaje Y Uso

04

Operating Instructions

WARNING: Children should not be allowed to use the device without supervision, unless proper
⚠
instructions were given, to operate the device safely and the child understands dangers of its incorrect
use.
Initial start up
For initial start up professional installation is necessary based on installation instructions required.
Operation
Operating panel ON/OFF.
Keeping the button pressed for 3 seconds → switches off the operating panel, all the activated functions will
be switched off.
3
ON/OFF all back jets, massage time 20 minutes.
6
2 Bottom back jets, massage time 20 minutes.
7
ON/OFF head spray, duration 20 minutes.
8
ON/OFF Scottish massage.
Alternating hot and cold water. Hot water for 2 minutes, cold water for 5 seconds, hot water for 2 minutes,
cold water for 5 seconds, hot water for 2 minutes. [W2] shows the remaining massage time.
2
ON/OFF steam bath + temperature selection.
The temperature (38, 40, 42, 44, 46, 48, 50°C) can be selected once the steam generator has been switched on.
temp.
[W1] indicates the selected temperature.
1
Steam bath readiness is indicated every 30 seconds by the halogen light fl ashing 3 times or by the white colour-
light.
Sets the steam bath duration (10, 20, 30 minutes) / Switches off the steam generator. [W1] stops fl ashing
once the target temperature has been reached. After that the steam bath duration is selectable. You can
extend the bath time during steam bathing.
5
During steam bathing water massage functions are disabled.
The head spray (cold shower!) can be activated as long as the button is pressed while the steam function is running.
W1
temp.
1 2 3
6 7 8
radio/MP3
11 12 13
W2
4 5
9 10
14 15
GB
15