Sauder Avenue Eight 416513 Manual Del Usuario
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Almacenamiento de Herramientas
  5. Avenue Eight 416513
  6. Manual del usuario

Sauder Avenue Eight 416513 Manual Del Usuario

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
sauder.com
Executive Desk
Avenue Eight Collection | Model 416513
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
Get executive
with this decision.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-40
Français pg 41-46
Español pg 47-52
Lot # 398173
11/23/16
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987

Publicidad

Capítulos

Tabla de contenido
loading

Manuales relacionados para Sauder Avenue Eight 416513

Resumen de contenidos para Sauder Avenue Eight 416513

  • Página 1 Avenue Eight Collection | Model 416513 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
  • Página 2 D708 LARGE DRAWER BOTTOM (2) KEYBOARD SHELF (1) RIGHT BOTTOM MOLDING (2) D716 DRAWER BOTTOM (4) LARGE DRAWER BOX FRONT (2) TOP FRONT MOLDING (1) LEFT UPRIGHT (1) LARGE RIGHT DRAWER FRONT (1) HALF DISK (8) Page 2 416513 www.sauder.com/services...

  • Página 3: Part Identifi Cation

    Now you know Part Identifi cation our ABCs. www.sauder.com/services 416513 Page 3...
  • Página 4 Now you know Part Identifi cation our ABCs. D716 D716 D716 D708 D716 D708 Page 4 416513 www.sauder.com/services...
  • Página 5 (EXTENSION SET SHOWN SEPARATED) WIDE WIDE FILE GLIDE - 4 FILE ROD - 4 EXTENSION RAIL - 4 EXTENSION SLIDE - 4 7F TWIST-LOCK HIDDEN CAM - 8 CAM DOWEL - 8 ® FASTENER - 25 www.sauder.com/services 416513 Page 5...
  • Página 6 FRONT BRACKET - 4 14H HINGE - 2 KEYBOARD HINGE - 2 KNOB - 8 FELT DISC CARD - 1 GROMMET CAP - 2 CORD CLIP - 1 GROMMET - 3 RUBBER SLEEVE - 4 METAL PIN - 12 Page 6 416513 www.sauder.com/services...

  • Página 7: Tabla De Contenido

    SILVER 5/8" FLAT HEAD SCREW - 4 BLACK 7/8" MACHINE SCREW - 4 SILVER 1-1/4" MACHINE SCREW - 4 100S BLACK 2-3/4" FLAT HEAD SCREW - 3 SILVER 9/16" LARGE HEAD SCREW - 2 113S BLACK 1-15/16" FLAT HEAD SCREW - 8 www.sauder.com/services 416513 Page 7...
  • Página 8 fl oor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1659 To begin assembly, push a SAUDER TWIST-LOCK® å to watch a video on how to assemble your unit. FASTENER (7F) into the large holes in the OUTER ENDS (A).
  • Página 9 Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow (8 used) Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. www.sauder.com/services 416513 Page 9...
  • Página 10 END and UPRIGHT. Turn a SCREW into this hole. NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. å Push the release lever in and pull the SLIDE from the RAIL. Open end Open end Open end Open end Page 10 416513 www.sauder.com/services...

  • Página 11: Black 9/16" Large Head Screw

    Push the black lever in and pull the SLIDE from the RAIL. Open end GOLD 5/16" FLAT HEAD SCREW (12 used in this step) Open end Open end (4 used) Open end BLACK 9/16" LARGE HEAD SCREW (4 used for the ANGLE BRACKETS) www.sauder.com/services 416513 Page 11...
  • Página 12 5/16" FLAT HEAD SCREWS (3S). NOTE: The CABINET RAILS are marked "CABINET å RIGHT" and "CABINET LEFT" for easy identifi cation. Roller end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) These holes must be here. Roller end Page 12 416513 www.sauder.com/services...
  • Página 13 Tap four MOLDING CONNECTORS (17F) into the notches å in the TOP MOLDINGS (LL and UU) and SIDE MOLDINGS (NN). Use your hammer to tap the MOLDING CONNECTORS (17F) into the notches in the MOLDINGS. Flat end Flat end www.sauder.com/services 416513 Page 13...

  • Página 14: Black 1-1/4" Flat Head Screw

    MOLDINGS (NN) to the TOP (F2). Use sixteen BLACK 1-1/4" FLAT HEAD SCREWS (7S). BLACK 1-1/4" FLAT HEAD SCREW (16 used in this step) The TOP REAR MOLDING (LL) has more holes. The large holes must be here. Page 14 416513 www.sauder.com/services...
  • Página 15 Fasten the UPPER BACK MOLDING (MM) to the TOP å REAR MOLDING (LL) on the TOP (F2). Tighten three TWIST-LOCK® FASTENERS. ® How to use the SAUDER TWIST-LOCK FASTENER Edge and surface with 1. Insert the dowel end of the FASTENER into the TWIST-LOCK® FASTENERS hole of the adjoining part.

  • Página 16: Brown 1" Flat Head Screw

    OUTER ENDS. The larger hole should be facing up. BROWN 1" FLAT HEAD SCREW (8 used in this step) (20 used) BLACK 9/16" LARGE HEAD SCREW (20 used for the ANGLE BRACKETS) Page 16 416513 www.sauder.com/services...
  • Página 17 MOLDINGS (NN) on the TOP (F2). Tighten four TWIST-LOCK® FASTENERS. r f a I S T w i t - L O ® r f a I S T w i t - L O ® www.sauder.com/services 416513 Page 17...
  • Página 18 These holes must be here. Use outer holes. Use outer holes. BLACK 9/16" LARGE HEAD SCREW (20 used for the ANGLE BRACKETS) Use outer holes. The MOLDING (M35) should be centered over the HALF DISK (VV). Page 18 416513 www.sauder.com/services...
  • Página 19 TOP. Open end r f a I S T w i t - L O ® (4 used) r f a I S T w i t - L O ® Open end www.sauder.com/services 416513 Page 19...

  • Página 20: Black 1/2" Flat Head Screw

    BACK (J) into the holes in the LEFT END (C3). 113S The large holes must be here. 113S BLACK 1-15/16" FLAT HEAD SCREW (4 used in this step) n i s h U n fi f a c s u r (4 used) Page 20 416513 www.sauder.com/services...
  • Página 21 BLACK 9/16" LARGE HEAD SCREW (4 used in this step) r f a I S T w i t - L O ® r f a I S T w i t - L O Roller end ® Open end www.sauder.com/services 416513 Page 21...

  • Página 22: Black 1-9/16" Flat Head Screw

    Push the CORD CLIP (9P) into the hole in the TOP (F2). å Unfi nished surface NOTE: The CORD CLIP is used to å manage your cords. 100S Rounded edge Curved edge 113S BLACK 1-15/16" FLAT HEAD SCREW (4 used for the UPRIGHTS) Page 22 416513 www.sauder.com/services...
  • Página 23 Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees www.sauder.com/services 416513 Page 23...
  • Página 24 Fasten the BRACES (K) to the OUTER ENDS (A), å UPRIGHTS (D2 and E2), and BOTTOMS (G2). Use eight Long edge BLACK 9/16" LARGE HEAD SCREWS (1S). with 5 holes BLACK 9/16" LARGE HEAD SCREW (16 used for the ANGLE BRACKETS) Page 24 416513 www.sauder.com/services...
  • Página 25 Fasten the BRACES (K) to the OUTER ENDS (A), å UPRIGHTS (D2 and E2), and BOTTOMS (G2). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S). Short edge with 3 holes BLACK 9/16" LARGE HEAD SCREW (16 used for the ANGLE BRACKETS) www.sauder.com/services 416513 Page 25...
  • Página 26 Use twenty-four BLACK 1-1/4" FLAT HEAD SCREWS (7S). BLACK 1-1/4" FLAT HEAD SCREW (24 used in this step) Use outer holes. Finished edge Edge without HALF DISK Edge without HALF DISK Use outer holes. Finished edge Edge without HALF DISK Page 26 416513 www.sauder.com/services...
  • Página 27 Step 20 Fasten the HINGES (14H) to the DOOR (L). Use four å BLACK 1/2" FLAT HEAD SCREWS (11S). BLACK 1/2" FLAT HEAD SCREW (4 used in this step) www.sauder.com/services 416513 Page 27...
  • Página 28 PINS (1R). Insert the METAL PINS into the hole locations of your choice in the LEFT END (C3) and LEFT UPRIGHT (E2). Set the ADJUSTABLE SHELF (M) onto the METAL PINS. Hinge Insert a GROMMET (10P) into the large hole in å the BOTTOM (G2). (4 used) Page 28 416513 www.sauder.com/services...
  • Página 29 Tighten the screws after making adjustments. To adjust the DOOR in or out (depth), loosen the mounting å screw one turn and move the DOOR in or out, as needed. Tighten the mounting screw after making adjustments. (vertical adjustment) www.sauder.com/services 416513 Page 29...
  • Página 30 Use two BLACK 1-1/4" FLAT HEAD SCREWS (7S). Finished edge Finished surface Short fi nished edge BLACK 1-1/4" FLAT HEAD SCREW (6 used in this step) Finished edge These holes must be here. Short fi nished edge Page 30 416513 www.sauder.com/services...

  • Página 31: Silver 5/8" Flat Head Screw

    Fasten the KEYBOARD HINGES (12H) to the KEYBOARD SHELF (R). å Use two SILVER 9/16" LARGE HEAD SCREWS (54S). SILVER 5/8" FLAT HEAD SCREW SILVER 9/16" LARGE HEAD SCREW (4 used in this step) (2 used in this step) www.sauder.com/services 416513 Page 31...
  • Página 32 Fasten two KNOBS (42K) to the KEYBOARD FRONT (O). å Use two BLACK 7/8" MACHINE SCREWS (37S). Roller end BLACK 7/8" MACHINE SCREW (2 used for the KNOBS) Roller end BROWN 1" FLAT HEAD SCREW (4 used for the DRAWER SLIDES) Page 32 416513 www.sauder.com/services...
  • Página 33 Be sure the grooves in each part line up with each other on the inside of the drawer. DRAWER Use top hole. Groove BLACK 1-9/16" FLAT HEAD SCREW Groove (16 used in this step) Use top hole. LARGE DRAWER Groove www.sauder.com/services 416513 Page 33...
  • Página 34 Slide the DRAWER BOTTOMS (D708 and D716) into the grooves å in the DRAWER SIDES (D33, D32, D34, D35, D36, and D37) and DRAWER BACKS (D78, D77, and D74). Repeat this step for the other drawers. å D716 D716 D708 Page 34 416513 www.sauder.com/services...
  • Página 35 PAN HEAD SCREWS (9S). Repeat this step for the other drawers using å the LEFT DRAWER FRONTS (BB and GG). BLACK 1-1/8" PAN HEAD SCREW (8 used for the DRAWER FRONTS) These edges should be even. www.sauder.com/services 416513 Page 35...

  • Página 36: Silver 1-1/4" Machine Screw

    (2 used for the KNOBS on the DRAWERS) t e n r r o Open end l i d r r o s i o t e n GOLD 5/16" FLAT HEAD SCREW (8 used in the fi rst hole in the SLIDES) Page 36 416513 www.sauder.com/services...
  • Página 37 Repeat this step for the other large drawer using the å LARGE LEFT DRAWER FRONT (U). BLACK 9/16" LARGE HEAD SCREW (8 used for the BRACKETS) BLACK 1-1/8" PAN HEAD SCREW (8 used for the DRAWER FRONTS) These edges should be even. www.sauder.com/services 416513 Page 37...
  • Página 38 FILE GLIDES, depending on your fi le sizes. l i d s i o t e n (4 screws per drawer) GOLD 5/16" FLAT HEAD SCREW (8 used in this step) Page 38 416513 www.sauder.com/services...
  • Página 39 Lift the front of the SHELF up and slide it into the unit. Click the inner cartridge into place against the black tab. Front Extension Rail Inner cartridge Black tab www.sauder.com/services 416513 Page 39...
  • Página 40 This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. å And to celebrate, why not share your success story? 10 lbs. 75 lbs. 20 lbs. 15 lbs. 15 lbs. each 30 lbs. 10 lbs. 30 lbs. Page 40 416513 www.sauder.com/services...

  • Página 41: Liste De Pièces

    élément et conserver le livret pour future référence. EXTRÉMITÉ EXTERNE ..........2 M35 MOULURE .................4 Pour contacter Sauder EXTRÉMITÉ DROITE ..........1 PLINTHE ................4 en ce qui concerne cet EXTRÉMITÉ GAUCHE ..........1 DEVANT DE TABLETTE DE CLAVIER ...1 élément, faire référence...
  • Página 42 12H CHARNIÈRE DE TABLETTE DE CLAVIER ..............2 14H CHARNIÈRE ..............2 42K BOUTON ................8 FICHE DE TAMPONS EN FEUTRE....1 COUVERCLE DE PASSE-CÂBLES ....2 CLIP POUR CORDONS ...........1 PASSE-CÂBLES ............3 GOUPILLE EN MÉTAL ...........12 MANCHON EN CAOUTCHOUC .....4 Page 42 416513 www.sauder.com/services...
  • Página 43 Pour commencer l'assemblage, enfoncer une FIXATION EXTRÉMITÉS et les MONTANTS. Faire tourner une VIS dans ce trou. TWIST-LOCK® SAUDER (7F) dans les gros trous des Fixer quatre CONSOLES À ÉQUERRE (27G) à l'EXTRÉMITÉ EXTRÉMITÉS EXTERNES (A).
  • Página 44 Fixer les ENTRETOISES (K) aux EXTRÉMITÉS EXTERNES (A), 14 mm NOIRES (1S) à travers les CONSOLES EN MÉTAL sur la MONTANTS (D2 et E2) et DESSOUS (G2). Utiliser huit VIS NOIRES MOULURE ARRIÈRE SUPÉRIEURE et dans les MONTANTS. TÊTE LARGE 14 mm (1S). Page 44 416513 www.sauder.com/services...
  • Página 45 PORTE vers l'intérieur ou vers l'extérieur. Serrer la vis de après des CÔTÉS DE TIROIR (D33, D32, D34, D35, D36 et D37) et les avoir ajusté. ARRIÈRES DE TIROIR (D78, D77 et D74). Répéter cette étape pour les autres tiroirs. www.sauder.com/services 416513 Page 45...
  • Página 46 Fixer le DEVANT DROIT DE GRAND TIROIR (T) au DEVANT DE CAISSON DU GRAND TIROIR (S). Utiliser quatre VIS NOIRES TÊTE GOUTTE DE SUIF 28 mm (9S). Répéter cette étape pour l'autre grand tiroir en utilisant le DEVANT GAUCHE DE GRAND TIROIR (U). Page 46 416513 www.sauder.com/services...

  • Página 47: Escritorio Ejecutivo

    EXTREMO DERECHO ..........1 CARA DE ESTANTE DE TECLADO ....1 pour future référence. Pour contacter Sauder EXTREMO IZQUIERDO ..........1 DORSO DE ESTANTE DE TECLADO ..... 1 en ce qui concerne cet PARAL DERECHO ............1 LADO DE ESTANTE DE TECLADO ....

  • Página 48: Lista De Partes

    12H BISAGRA DE ESTANTE DE TECLADO ..2 BISAGRA ................2 42K POMO ..................8 TARJETA CON TOPES DE FIELTRO ....1 CUBIERTA DE OJAL ............ 2 GRAPA DEL CABLE ............. 1 10P OJAL..................3 ESPIGA DE METAL ............12 MANGUITO DE GOMA ..........4 Page 48 416513 www.sauder.com/services...

  • Página 49: Excéntrico Escondido

    Fije cuatro SOPORTES ANGULARES (27G) al EXTREMO DERECHO (B3) y Para comenzar el ensamblaje, empuje un SUJETADOR al PARAL DERECHO (D2). Utilice cuatro TORNILLOS NEGROS DE CABEZA TWIST-LOCK® SAUDER (7F) dentro de los agujeros grandes GRANDE de 14 mm (1S). de los EXTREMOS EXTERIORES (A).

  • Página 50: Sujetador Twist-Lock

    NEGROS DE CABEZA GRANDE de 14 mm (1S). y E2). Introduzca cuatro TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S) por entre los SOPORTES DE METAL en la MOLDURA POSTERIOR SUPERIOR y por entre los PARALES. Page 50 416513 www.sauder.com/services...

  • Página 51: De Cajón Pequeño

    LADOS DE CAJÓN (D33, D32, D34, D35, D36 y D37) y de los DORSOS interior o hacia el exterior según sea necesario. Apriete el tornillo de DE CAJÓN (D78, D77 y D74). montaje después de hacer los ajustes. Repita este paso para los otros cajones. www.sauder.com/services 416513 Page 51...

  • Página 52: De Cajón Grande

    Fije la CARA DERECHA DE CAJÓN GRANDE (T) al FRENTE DE CAJÓN GRANDE (S). Utilice cuatro TORNILLOS NEGROS DE CABEZA REDONDA de 28 mm (9S). Repita este paso para el otro cajón grande utilizando la CARA IZQUIERDA DE CAJÓN GRANDE (U). Page 52 416513 www.sauder.com/services...
  • Página 53 à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 416513 Page 53...
  • Página 54 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 54 416513 www.sauder.com/services...

  • Página 55: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 56 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.

Este manual también es adecuado para:

416513

Tabla de contenido