Picture Mode - Naxa NX-555 Manual De Instrucciones

You can dispaly the input source menu by pressing the INPUT on
the remote control or TV/AV on the front panel, press
to select, press "ENTER" button to confirm.
Video menu options
In this manual, the OSD(On Screen Display) may be different from your TV's because it Is just
an example to help the TV operation.
Press the MENU on the front panel or LCD-MENU on the remote control and then use
Video menu, press

Picture Mode

Brightness
Contrast
Saturation
Tint
Sharpness
Color Temperature
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in
PICTURE menu. You may select the picture mode directly by pressing the PMODE button on the remote
control.
Brightness
Press button and then use
Contrast
Press button and then use
Saturation
Press button and then use
Tint
Press button and then use
Sharpness
Press button and then use
Color Temperature
Press "ENTER" to enter the submenu.
Color Temperature: press
And the "R Gain, G Gain, B Gain" numbers in "User" mode
is set by youself.
or ENTER button to enter it(see the picture below).
Video
User
50
50
50
0
3
Select
MENU
to adjust the brightness of the picture.
to adjust the contrast of the picture.
to adjust the saturation of the picture.
to adjust the Tint of the picture(in NTSC mode).
to adjust the sharpness level of picture.
button to select the mode
------User, Cool, Standard, Warm
button
1. Use to select what you want to adjust in the
Video menu.
2. Press ENTER or
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU.
Exit
to select the
/ button to adjust(according to
Color Temperature
R Gain
G Gain
B Gain
User
0
0
-20
Select Back
MENU
10