Audio Mode - Naxa NX-555 Manual De Instrucciones

Audio menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use
AUDIO menu, press
Balance
Bass
Treble
Sound mode
SPDIF type

Audio Mode

You can select the type of sound which best corresponds to your listening requirements by selecting Sound
in SOUND menu. You may select the sound mode directly by pressing the SMODE button on the remote
control.
Balance
Press button and then use
Bass
Press button and then use
Treble
Press button and then use
Spdif Type
Press to select the one of mode of the digital audio output such as PCM and Dolby digital or off.
TV menu options
Press the MENU on the front panel or LCD-MENU on the remote control and then use
TV menu, press or ENTER button to enter it(see the picture below).
T n u r e M o e d
Channel Scan
Channel Skip
Tuner Mode
You can select the signal input mode: Antenna, Cable.
Channel Scan
Select "Channel Scan", press ENTER button to start the channel scan. Press
will not stop untill the scan is finished.
T n u r e M o e d
Channel Scan
Channel Skip
Scan
ENTER
11
or ENTER button to enter it(see the picture below).
Audio
0
50
50
Concert
PCM
Select Exit
MENU
to adjust the audio output between left and right speakers.
increase or decrease the level of the lower-pitched sounds.
to increase or decrease the level of the higher-pitched sounds
TV
A t n n e a n
Select Exit
MENU
A t n n e a n
Select Back
MENU
1. Use to select what you want to adjust in the
Audio menu.
2. Press ENTER or
the hint below).
3. When you are satisfied with your adjustment, press
LCD-MENU. .
1. Use to select what you want to adjust in the TV
menu.
2. Press ENTER or
the hint below).
3. When you are satisfied with your adjustment, press
.
LCD-MENU.
to select the
/ button to adjust(according to
to select the
/ button to adjust(according to
to stop or it
LCD-MENU