Hedge Trimmer Safety Warnings; Components - BLACK&DECKER NHT2218 Manual De Instrucciones

6) Service
a) have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.

hedge trimmer SAfety wArNiNgS

• Use both hands when operating the hedge trimmer. Using
one hand could cause loss of control and result in serious
personal injury.
• keep all parts of the body away from the cutter blade. do not
remove cut material or hold material to be cut when blades
are moving. make sure the switch is off when clearing jammed
material. Blades coast after turn off. A moment of inattention
while operating the hedge trimmer may result in serious personal
injury.
• Carry the hedge trimmer by the handle with the cutter blade
stopped. Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring or its own
cord. Cutter blades contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an
electric shock.
• keep cable away from cutting area. During operation the cable
may be hidden in shrubs and can be accidentally cut by the blade.
• dANger - keep hands away from blade. Contact with blade will
result in serious personal injury.
:
wArNiNg Only use with handle and guard properly
assembled to hedge trimmer. the use of the hedge trimmer
without the proper guard or handle provided may result in
serious personnal injury.
:
wArNiNg
Some dust created by this product
contains chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm. Some examples of these
chemicals are:
• compounds in fertilizers
• compounds in insecticides, herbicides and pesticides
• arsenic and chromium from chemically treated lumber
To reduce your exposure to these chemicals, wear approved safety
equipment such as dust masks that are specially designed to filter
out microscopic particles.
The label on your tool may include the following symbols.
V ............... volts
Hz ............. hertz
min ............ minutes
.......... direct current
.............. Class II Construction
............. safety alert symbol

COmPONeNtS

1. Trigger Switch
2. Lock Button
3. Switch Handle
4. Blade Guard
5. Bail Handle
6. Charger
7. Battery
8. Blade
4
A ....................amperes
W ...................watts
..................alternating current
n o ...................no load speed
....................earthing terminal
.../min .............strokes
per minute
2
5
4
8
7
3
6