Dräger Polaris 50 Manual De Usuario página 33


Tighten the cable holder using a type 3 Allen screw on
the upper support tube (2.4 Nm).
WARNING
Never unscrew the upper cable holder — risk of injury.

If both cable holders are unscrewed, the connecting
piece will come loose and fall, which can cause
personal injury and damage to the cable and device.
Carefully pull off the covers "A".


Remove the M4 Allen screw with the washer.

Push the plug for the spring-balanced arm against the
plug for the upper support tube until they click together.
A

Attach the spring-balanced arm to the support tube.

Align the thread in the spring-balanced arm in relation to
the opening in the support tube, insert the M4 Allen
screw and washer, and then tighten.
A
Reattach the covers "A" one after the other. Make sure

that the cover "B" is positioned in the groove of both
covers "A".
DANGER
Risk of death from electric shock.

Do not turn on the power supply before the luminaire
head has been installed.
ENG
B
33