Using The Appliance; Brushing Instructions - Philips Sonicare HX6321/03 Manual De Instrucciones

3 To connect the toothbrush to the app, turn on the toothbrush by
pressing either the power on/off button or the brushing mode
button. Make sure the toothbrush is not on the charger when you
turn it on.
4 Open the Philips Sonicare For Kids app.
5 Follow the app instructions displayed on your mobile device. The
app automatically connects with the toothbrush. If the toothbrush
does not connect, follow the troubleshooting steps provided in the
app.
6 Keep your mobile device close to your toothbrush when you use
your toothbrush. Make sure your mobile device is safe in a dry
place.

Using the appliance

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle (45
degrees), where the teeth and the gumline meet. This is to ensure
that the whole tooth surface is brushed (Fig. 6).
3 Press the power on/off button to turn on the Sonicare.
4 Apply light pressure to maximize Sonicare's effectiveness and let
the Sonicare toothbrush do the brushing for you. Do not scrub (Fig.
7).
5 Maintain light pressure and gently brush the outer and inner
surfaces of all top and bottom teeth while you keep the
toothbrush at an angle such that the toothbrush bristles touch the
area where the teeth and the gumline meet.
6 The inner and outer surfaces of the upper and lower back teeth
are hard to reach. Spend time brushing these areas, apply light
pressure and maintain the angle of the toothbrush bristles to the
gumline (Fig. 8).
7 Brush the chewing surfaces of all the upper and lower teeth.
13
English