Charging the appliance
1
Put the plug of the charger or sanitiser in a wall socket.
2
Place the handle on the charger (Fig. 3).
The flashing light of the battery level indicator shows that the
,
toothbrush is charging.
Note: It takes at least 24 hours to fully charge the battery.
Using the appliance
Brushing instructions
1
Wet the bristles (Fig. 4).
2
Apply a small amount of toothpaste on the bristles. (Fig. 5)
3
Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), pressing firmly to make the bristles reach the gumline
or slightly beneath the gumline. A change in vibration (and a slight
change in sound) alerts you when you apply too much pressure
while brushing (Fig. 6).
Note: Keep the centre of the brush in contact with the teeth at all times.
4
Press the power on/off button to switch on the Sonicare (Fig. 7).
5
Gently keep the bristles placed on the teeth and in the gumline.
Brush your teeth with small back and forth motions so the bristles
reach between the teeth (Fig. 8).
Note: The bristles should flare slightly. Do not scrub.
6
To clean the inside surfaces of the front teeth, tilt the brush handle
semi-upright and make several vertical overlapping brushing strokes
on each tooth (Fig. 9).
ENGLISH
11