REVENT RVS50 Guia De Instalacion página 17

WARNING: Disconnect the AC power before any work is done to any part of
the circuit ReVent
seek the services of a qualified licensed electrician.
WARNING: Copper to copper only. Do not use aluminum wire.
WARNING: Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION: If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
qualified licensed electrician to determine this safely.
6.) Disconnect FAN motor from electrical enclosure. Remove the electrical cover
set screw and slide open the electrical enclosure.
unplug fan
connector
remove set
screw
7.) Connect wiring using the provided QUICK CONNECTS (U.S.A.) or WIRE NUTS
(Canada).
2-WIRE QUICK
CONNECT
(U.S.A. only)
Match wire colors as shown:
is connected to. If you do not understand this warning,
®
Qty:2
line
ground
FAN
ground
housing
ground
slide
3-WIRE QUICK
CONNECT
Qty:1
(U.S.A. only)
line in
neutral
neutral
16
OR
WIRE NUT
Qty:3
(Canada only)
line in
FAN
FAN