MADER APW-VAS-150P Manual Del Usuario página 45

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

the safety of the appliance. Use only hoses, fittings and couplings
recommended by the manufacturer
WARNING: Do not use the appliance if a supply cord or important parts
are damaged, e.g. safety devices, high pressure hoses, trigger gun.
WARNING: Incorrect fuels shall not be used, as they may prove
hazardous.
WARNING: Be aware of the recoil caused by the water jet when the
machine is switched on.
! This unit is to be connected to a cold water source ONLY.
! The motor of this pressure washer will NOT run, it will only operate
when the trigger is squeezed.
- Connect the outlet hose to the washer and connect the spray gun to
the outlet hose.
- Connect nozzle and nozzle extension.
- Check gauze filter is clear of any blockage.
- Connect the water supply hose.
- Check that the hose has no kinks in it.
- Turn on water and check for leaks.
- Depress trigger to allow air to be expelled though the pump and hoses,
lock trigger.
- Plug in machine and turn on switch.
- Unlock trigger and use the pressure washer.
1.
Turn off the motor(push switch to the off position)
2.
Unplug the unit from the power source.
3.
Turn off the water supply.
OPERATING INSTRUCTIONS
SHUT DOWN
42

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Apw-vas-150a

Tabla de contenido