Before Operating; To Set The Clock; Stop/Clear - Viking Range VMDD5306SS Manual De Uso Y Cuidado

Before Operating

• Before operating your new oven make sure you read
and understand this Use and Care Manual completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will
show WELCOME TOUCH CLEAR
2. Touch the STOP/CLEAR pad.
3. Set clock.

TO SET THE CLOCK

1. Touch TIMER/SETTINGS pad twice.
2. Enter the correct time of day by touching the numbers
in sequence. Touch START/+30 SEC pad.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, ERROR will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your oven should be
interrupted, the display will intermittently show
TOUCH CLEAR after the power is reinstated. If this occurs
during cooking, the program will be erased. The time
of day will also be erased. Simply touch STOP/CLEAR
pad and reset the clock for the correct time of day.
.
: will appear.
WELCOME

STOP/CLEAR

Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
13
E